/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * libmm -- Access modem status & information from glib applications * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, * Boston, MA 02110-1301 USA. * * Copyright (C) 2011 Aleksander Morgado */ #include #include #include "mm-helpers.h" #include "mm-modem.h" /** * mm_modem_get_path: * @self: A #MMModem. * * Gets the DBus path of the #MMObject which implements this interface. * * Returns: (transfer none): The DBus path of the #MMObject object. */ const gchar * mm_modem_get_path (MMModem *self) { g_return_val_if_fail (G_IS_DBUS_PROXY (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( g_dbus_proxy_get_object_path (G_DBUS_PROXY (self))); } /** * mm_modem_dup_path: * @self: A #MMModem. * * Gets a copy of the DBus path of the #MMObject object which implements this interface. * * Returns: (transfer full): The DBus path of the #MMObject. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_path (MMModem *self) { gchar *value; g_return_val_if_fail (G_IS_DBUS_PROXY (self), NULL); g_object_get (G_OBJECT (self), "g-object-path", &value, NULL); RETURN_NON_EMPTY_STRING (value); } /** * mm_modem_get_sim_path: * @self: A #MMModem. * * Gets the DBus path of the #MMSim handled in this #MMModem. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_sim_path() if on another thread. * * Returns: (transfer none): The DBus path of the #MMSim handled in this #MMModem, or %NULL if none available. */ const gchar * mm_modem_get_sim_path (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING (mm_gdbus_modem_get_sim (self)); } /** * mm_modem_dup_sim_path: * @self: A #MMModem. * * Gets a copy of the DBus path of the #MMSim handled in this #MMModem. * * Returns: (transfer full): The DBus path of the #MMSim handled in this #MMModem, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_sim_path (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_sim (self)); } /** * mm_modem_get_modem_capabilities: * @self: A #MMModem. * * Gets the list of generic families of access technologies supported by this #MMModem. * * Not all capabilities are available at the same time however; some * modems require a firmware reload or other reinitialization to switch * between e.g. CDMA/EVDO and GSM/UMTS. * * Returns: A bitmask of #MMModemCapability flags. */ MMModemCapability mm_modem_get_modem_capabilities (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_CAPABILITY_NONE); return (MMModemCapability) mm_gdbus_modem_get_modem_capabilities (self); } /** * mm_modem_get_current_capabilities: * @self: A #MMModem. * * Gets the list of generic families of access technologies supported by this #MMModem * without a firmware reload or reinitialization. * * Returns: A bitmask of #MMModemCapability flags. */ MMModemCapability mm_modem_get_current_capabilities (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_CAPABILITY_NONE); return mm_gdbus_modem_get_current_capabilities (self); } /** * mm_modem_get_max_bearers: * @self: a #MMModem. * * Gets the maximum number of defined packet data bearers this #MMModem supports. * * This is not the number of active/connected bearers the modem supports, * but simply the number of bearers that may be defined at any given time. * For example, POTS and CDMA2000-only devices support only one bearer, * while GSM/UMTS devices typically support three or more, and any * LTE-capable device (whether LTE-only, GSM/UMTS-capable, and/or * CDMA2000-capable) also typically support three or more. * * Returns: the maximum number of defined packet data bearers. */ guint mm_modem_get_max_bearers (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); return mm_gdbus_modem_get_max_bearers (self); } /** * mm_modem_get_max_bearers: * @self: a #MMModem. * * Gets the maximum number of active packet data bearers this #MMModem supports. * * POTS and CDMA2000-only devices support one active bearer, while GSM/UMTS * and LTE-capable devices (including LTE/CDMA devices) typically support * at least two active bearers. * * Returns: the maximum number of defined packet data bearers. */ guint mm_modem_get_max_active_bearers (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); return mm_gdbus_modem_get_max_active_bearers (self); } /** * mm_modem_get_manufacturer: * @self: A #MMModem. * * Gets the equipment manufacturer, as reported by this #MMModem. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_manufacturer() if on another thread. * * Returns: (transfer none): The equipment manufacturer, or %NULL if none available. */ const gchar * mm_modem_get_manufacturer (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_manufacturer (self)); } /** * mm_modem_dup_manufacturer: * @self: A #MMModem. * * Gets a copy of the equipment manufacturer, as reported by this #MMModem. * * Returns: (transfer full): The equipment manufacturer, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_manufacturer (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_manufacturer (self)); } /** * mm_modem_get_model: * @self: A #MMModem. * * Gets the equipment model, as reported by this #MMModem. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_model() if on another thread. * * Returns: (transfer none): The equipment model, or %NULL if none available. */ const gchar * mm_modem_get_model (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_model (self)); } /** * mm_modem_dup_model: * @self: A #MMModem. * * Gets a copy of the equipment model, as reported by this #MMModem. * * Returns: (transfer full): The equipment model, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_model (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_model (self)); } /** * mm_modem_get_revision: * @self: A #MMModem. * * Gets the equipment revision, as reported by this #MMModem. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_revision() if on another thread. * * Returns: (transfer none): The equipment revision, or %NULL if none available. */ const gchar * mm_modem_get_revision (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_revision (self)); } /** * mm_modem_dup_revision: * @self: A #MMModem. * * Gets a copy of the equipment revision, as reported by this #MMModem. * * Returns: (transfer full): The equipment revision, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_revision (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_revision (self)); } /** * mm_modem_get_device_identifier: * @self: A #MMModem. * * Gets a best-effort device identifier based on various device information like * model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties. * * This ID is not guaranteed to be unique and may be shared between * identical devices with the same firmware, but is intended to be "unique * enough" for use as a casual device identifier for various user * experience operations. * * This is not the device's IMEI or ESN since those may not be available * before unlocking the device via a PIN. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_device_identifier() if on another thread. * * Returns: (transfer none): The device identifier, or %NULL if none available. */ const gchar * mm_modem_get_device_identifier (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_device_identifier (self)); } /** * mm_modem_dup_device_identifier: * @self: A #MMModem. * * Gets a copy of a best-effort device identifier based on various device information * like model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties. * * This ID is not guaranteed to be unique and may be shared between * identical devices with the same firmware, but is intended to be "unique * enough" for use as a casual device identifier for various user * experience operations. * * This is not the device's IMEI or ESN since those may not be available * before unlocking the device via a PIN. * * Returns: (transfer full): The device identifier, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_device_identifier (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_device_identifier (self)); } /** * mm_modem_get_device: * @self: A #MMModem. * * Gets the physical modem device reference (ie, USB, PCI, PCMCIA device), which * may be dependent upon the operating system. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_device() if on another thread. * * Returns: (transfer none): The device, or %NULL if none available. */ const gchar * mm_modem_get_device (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_device (self)); } /** * mm_modem_dup_device: * @self: A #MMModem. * * Gets a copy of the physical modem device reference (ie, USB, PCI, PCMCIA device), which * may be dependent upon the operating system. * * Returns: (transfer full): The device, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_device (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_device (self)); } /** * mm_modem_get_driver: * @self: A #MMModem. * * Gets the Operating System device driver handling communication with the modem * hardware. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_driver() if on another thread. * * Returns: (transfer none): The driver, or %NULL if none available. */ const gchar * mm_modem_get_driver (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_driver (self)); } /** * mm_modem_dup_driver: * @self: A #MMModem. * * Gets a copy of the Operating System device driver handling communication with the modem * hardware. * * Returns: (transfer full): The driver, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_driver (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_driver (self)); } /** * mm_modem_get_plugin: * @self: A #MMModem. * * Gets the name of the plugin handling this #MMModem. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_plugin() if on another thread. * * Returns: (transfer none): The name of the plugin, or %NULL if none available. */ const gchar * mm_modem_get_plugin (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_plugin (self)); } /** * mm_modem_dup_plugin: * @self: A #MMModem. * * Gets a copy of the name of the plugin handling this #MMModem. * * Returns: (transfer full): The name of the plugin, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_plugin (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_plugin (self)); } /** * mm_modem_get_equipment_identifier: * @self: A #MMModem. * * Gets the identity of the #MMModem. * * This will be the IMEI number for GSM devices and the hex-format ESN/MEID * for CDMA devices. * * It is only safe to use this function on the thread where @self was constructed. Use mm_modem_dup_equipment_identifier() if on another thread. * * Returns: (transfer none): The equipment identifier, or %NULL if none available. */ const gchar * mm_modem_get_equipment_identifier (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_CONSTANT_STRING ( mm_gdbus_modem_get_equipment_identifier (self)); } /** * mm_modem_dup_equipment_identifier: * @self: A #MMModem. * * Gets a copy of the identity of the #MMModem. * * This will be the IMEI number for GSM devices and the hex-format ESN/MEID * for CDMA devices. * * Returns: (transfer full): The equipment identifier, or %NULL if none available. The returned value should be freed with g_free(). */ gchar * mm_modem_dup_equipment_identifier (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); RETURN_NON_EMPTY_STRING ( mm_gdbus_modem_dup_equipment_identifier (self)); } /** * mm_modem_get_unlock_required: * @self: A #MMModem. * * Gets current lock state of the #MMModemm. * * Returns: A #MMModemLock value, specifying the current lock state. */ MMModemLock mm_modem_get_unlock_required (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_LOCK_UNKNOWN); return (MMModemLock) mm_gdbus_modem_get_unlock_required (self); } /** * mm_modem_get_unlock_retries: * @self: A #MMModem. * * Gets the number of unlock retries remaining for the lock code given by the * UnlockRequired property (if any), or 999 if the device does not support reporting * unlock retries. * * Returns: The number of unlock retries. */ guint mm_modem_get_unlock_retries (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); return mm_gdbus_modem_get_unlock_retries (self); } /** * mm_modem_get_state: * @self: A #MMModem. * * Gets the overall state of the #MMModem. * * Returns: A #MMModemState value. */ MMModemState mm_modem_get_state (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_STATE_UNKNOWN); return (MMModemState) mm_gdbus_modem_get_state (self); } /** * mm_modem_get_access_technology: * @self: A #MMModem. * * Gets the current network access technology used by the #MMModem to communicate * with the network. * * Returns: A ##MMModemAccessTech value. */ MMModemAccessTech mm_modem_get_access_technology (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_ACCESS_TECH_UNKNOWN); return (MMModemAccessTech) mm_gdbus_modem_get_access_technology (self); } /** * mm_modem_get_signal_quality: * @self: A #MMModem. * @recent: (out): Return location for the flag specifying if the signal quality value was recent or not. * * Gets the signal quality value in percent (0 - 100) of the dominant access technology * the #MMModem is using to communicate with the network. * * Always 0 for POTS devices. * * Returns: The signal quality. */ guint mm_modem_get_signal_quality (MMModem *self, gboolean *recent) { GVariant *variant; gboolean is_recent = FALSE; guint quality = 0; g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), 0); variant = mm_gdbus_modem_get_signal_quality (self); if (variant) { g_variant_get (variant, "(ub)", &quality, &is_recent); } if (recent) *recent = is_recent; return quality; } /** * mm_modem_get_supported_modes: * @self: A #MMModem. * * Gets the list of modes specifying the access technologies supported by the #MMModem. * * For POTS devices, only #MM_MODEM_MODE_ANY will be returned. * * Returns: A bitmask of #MMModemMode values. */ MMModemMode mm_modem_get_supported_modes (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); return (MMModemMode) mm_gdbus_modem_get_supported_modes (self); } /** * mm_modem_get_allowed_modes: * @self: A #MMModem. * * Gets the list of modes specifying the access technologies (eg 2G/3G/4G preference) * the #MMModem is currently allowed to use when connecting to a network. * * For POTS devices, only the #MM_MODEM_MODE_ANY is supported. * * Returns: A bitmask of #MMModemMode values. */ MMModemMode mm_modem_get_allowed_modes (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); return (MMModemMode) mm_gdbus_modem_get_allowed_modes (self); } /** * mm_modem_get_preferred_mode: * @self: A #MMModem. * * Get the preferred access technology (eg 2G/3G/4G preference), among * the ones defined in the allowed modes. * * Returns: A single #MMModemMode value. */ MMModemMode mm_modem_get_preferred_mode (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); return (MMModemMode) mm_gdbus_modem_get_preferred_mode (self); } /** * mm_modem_get_supported_bands: * @self: A #MMModem. * * Gets the list of radio frequency and technology bands supported by the #MMModem. * * For POTS devices, only #MM_MODEM_BAND_ANY will be returned. * * Returns: A bitmask of #MMModemBand values. */ MMModemBand mm_modem_get_supported_bands (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); return (MMModemBand) mm_gdbus_modem_get_supported_bands (self); } /** * mm_modem_get_allowed_bands: * @self: A #MMModem. * * Gets the list of radio frequency and technology bands the #MMModem is currently * allowed to use when connecting to a network. * * For POTS devices, only the #MM_MODEM_BAND_ANY band is supported. * * Returns: A bitmask of #MMModemBand values. */ MMModemBand mm_modem_get_allowed_bands (MMModem *self) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), MM_MODEM_MODE_NONE); return (MMModemBand) mm_gdbus_modem_get_allowed_bands (self); } /** * mm_modem_enable: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. * @user_data: User data to pass to @callback. * * Asynchronously tries to enable the #MMModem. When enabled, the modem's radio is * powered on and data sessions, voice calls, location services, and Short Message * Service may be available. * * When the operation is finished, @callback will be invoked in the thread-default main loop of the thread you are calling this method from. * You can then call mm_modem_enable_finish() to get the result of the operation. * * See mm_modem_enable_sync() for the synchronous, blocking version of this method. */ void mm_modem_enable (MMModem *self, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_enable (self, TRUE, cancellable, callback, user_data); } /** * mm_modem_enable_finish: * @self: A #MMModem. * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_enable(). * @error: Return location for error or %NULL. * * Finishes an operation started with mm_modem_enable(). * * Returns: (skip): %TRUE if the modem was properly enabled, %FALSE if @error is set. */ gboolean mm_modem_enable_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_enable_finish (self, res, error); } /** * mm_modem_enable_sync: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @error: Return location for error or %NULL. * * Synchronously tries to enable the #MMModem. When enabled, the modem's radio is * powered on and data sessions, voice calls, location services, and Short Message * Service may be available. * * The calling thread is blocked until a reply is received. See mm_modem_enable() * for the asynchronous version of this method. * * Returns: (skip): %TRUE if the modem was properly enabled, %FALSE if @error is set. */ gboolean mm_modem_enable_sync (MMModem *self, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_enable_sync (self, TRUE, cancellable, error); } /** * mm_modem_disable: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. * @user_data: User data to pass to @callback. * * Asynchronously tries to disable the #MMModem. When disabled, the modem enters * low-power state and no network-related operations are available. * * When the operation is finished, @callback will be invoked in the thread-default main loop of the thread you are calling this method from. * You can then call mm_modem_disable_finish() to get the result of the operation. * * See mm_modem_disable_sync() for the synchronous, blocking version of this method. */ void mm_modem_disable (MMModem *self, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_enable (self, FALSE, cancellable, callback, user_data); } /** * mm_modem_disable_finish: * @self: A #MMModem. * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_disable(). * @error: Return location for error or %NULL. * * Finishes an operation started with mm_modem_disable(). * * Returns: (skip): %TRUE if the modem was properly disabled, %FALSE if @error is set. */ gboolean mm_modem_disable_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_enable_finish (self, res, error); } /** * mm_modem_disable_sync: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @error: Return location for error or %NULL. * * Synchronously tries to disable the #MMModem. When disabled, the modem enters * low-power state and no network-related operations are available. * * The calling thread is blocked until a reply is received. See mm_modem_disable() * for the asynchronous version of this method. * * Returns: (skip): %TRUE if the modem was properly disabled, %FALSE if @error is set. */ gboolean mm_modem_disable_sync (MMModem *self, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_enable_sync (self, FALSE, cancellable, error); } /** * mm_modem_list_bearers: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. * @user_data: User data to pass to @callback. * * Asynchronously lists the packet data bearers in the #MMModem. * * When the operation is finished, @callback will be invoked in the thread-default main loop of the thread you are calling this method from. * You can then call mm_modem_list_bearers_finish() to get the result of the operation. * * See mm_modem_list_bearers_sync() for the synchronous, blocking version of this method. */ void mm_modem_list_bearers (MMModem *self, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_list_bearers (self, cancellable, callback, user_data); } /** * mm_modem_list_bearers_finish: * @self: A #MMModem. * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_list_bearers(). * @error: Return location for error or %NULL. * * Finishes an operation started with mm_modem_list_bearers(). * * Returns: (transfer-full): The list of bearer object paths, or %NULL if either none found or if @error is set. */ gchar ** mm_modem_list_bearers_finish (MMModem *self, GAsyncResult *res, GError **error) { gchar **list; g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); if (!mm_gdbus_modem_call_list_bearers_finish (self, &list, res, error)) return NULL; /* Only non-empty lists are returned */ if (list && list[0]) return list; g_strfreev (list); return NULL; } /** * mm_modem_list_bearers_sync: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @error: Return location for error or %NULL. * * Synchronously lists the packet data bearers in the #MMModem. * * The calling thread is blocked until a reply is received. See mm_modem_list_bearers() * for the asynchronous version of this method. * * Returns: (transfer-full): The list of bearer object paths, or %NULL if either none found or if @error is set. */ gchar ** mm_modem_list_bearers_sync (MMModem *self, GCancellable *cancellable, GError **error) { gchar **list; g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); if (!mm_gdbus_modem_call_list_bearers_sync (self, &list, cancellable, error)) return NULL; /* Only non-empty lists are returned */ if (list && list[0]) return list; g_strfreev (list); return NULL; } static GVariant * create_bearer_build_properties (const gchar *first_property_name, va_list var_args) { const gchar *key; GVariantBuilder builder; g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{ss}")); key = first_property_name; while (key) { const gchar *value; /* If a key with NULL value is given, just ignore it. */ value = va_arg (var_args, gchar *); if (value) g_variant_builder_add (&builder, "{ss}", key, value); key = va_arg (var_args, gchar *); } return g_variant_builder_end (&builder); } /** * mm_modem_create_bearer: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. * @user_data: User data to pass to @callback. * @first_property_name: Name of the first property to set. * @...: Value for the first property, followed optionally by more name/value pairs, followed by %NULL. * * Asynchronously creates a new packet data bearer in the #MMModem. * * This request may fail if the modem does not support additional bearers, * if too many bearers are already defined, or if @properties are invalid. * * See CreateBearer to check which properties may be passed. * * When the operation is finished, @callback will be invoked in the thread-default main loop of the thread you are calling this method from. * You can then call mm_modem_create_bearer_finish() to get the result of the operation. * * See mm_modem_create_bearer_sync() for the synchronous, blocking version of this method. */ void mm_modem_create_bearer (MMModem *self, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data, const gchar *first_property_name, ...) { va_list va_args; GVariant *properties; g_return_if_fail (MM_GDBUS_IS_MODEM (self)); va_start (va_args, first_property_name); properties = create_bearer_build_properties (first_property_name, va_args); mm_gdbus_modem_call_create_bearer (self, properties, cancellable, callback, user_data); g_variant_unref (properties); va_end (va_args); } /** * mm_modem_create_bearer_finish: * @self: A #MMModem. * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_create_bearer(). * @error: Return location for error or %NULL. * * Finishes an operation started with mm_modem_create_bearer(). * * Returns: (transfer-full): Path of the newly created bearer, or %NULL if @error is set. */ gchar * mm_modem_create_bearer_finish (MMModem *self, GAsyncResult *res, GError **error) { gchar *out_path = NULL; g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); if (!mm_gdbus_modem_call_create_bearer_finish (self, &out_path, res, error)) return NULL; return out_path; } /** * mm_modem_create_bearer_sync: * @self: A #MMModem. * @cancellable: (allow-none): A #GCancellable or %NULL. * @error: Return location for error or %NULL. * @first_property_name: Name of the first property to set. * @...: Value for the first property, followed optionally by more name/value pairs, followed by %NULL. * * Synchronously creates a new packet data bearer in the #MMModem. * * This request may fail if the modem does not support additional bearers, * if too many bearers are already defined, or if @properties are invalid. * * See CreateBearer to check which properties may be passed. * * The calling thread is blocked until a reply is received. See mm_modem_create_bearer() * for the asynchronous version of this method. * * Returns: (transfer-full): Path of the newly created bearer, or %NULL if @error is set. */ gchar * mm_modem_create_bearer_sync (MMModem *self, GCancellable *cancellable, GError **error, const gchar *first_property_name, ...) { va_list va_args; GVariant *properties; gchar *out_path = NULL; g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); va_start (va_args, first_property_name); properties = create_bearer_build_properties (first_property_name, va_args); mm_gdbus_modem_call_create_bearer_sync (self, properties, &out_path, cancellable, error); g_variant_unref (properties); va_end (va_args); return out_path; } /** * mm_modem_delete_bearer: * @self: A #MMModem. * @bearer: Path of the bearer to delete. * @cancellable: (allow-none): A #GCancellable or %NULL. * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. * @user_data: User data to pass to @callback. * * Asynchronously deletes a given bearer from the #MMModem. * * When the operation is finished, @callback will be invoked in the thread-default main loop of the thread you are calling this method from. * You can then call mm_modem_delete_bearer_finish() to get the result of the operation. * * See mm_modem_delete_bearer_sync() for the synchronous, blocking version of this method. */ void mm_modem_delete_bearer (MMModem *self, const gchar *bearer, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_delete_bearer (self, bearer, cancellable, callback, user_data); } /** * mm_modem_delete_bearer_finish: * @self: A #MMModem. * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_delete_bearer(). * @error: Return location for error or %NULL. * * Finishes an operation started with mm_modem_delete_bearer(). * * Returns: (skip): %TRUE if the bearer was deleted, %FALSE if @error is set. */ gboolean mm_modem_delete_bearer_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_delete_bearer_finish (self, res, error); } /** * mm_modem_delete_bearer_sync: * @self: A #MMModem. * @bearer: Path of the bearer to delete. * @cancellable: (allow-none): A #GCancellable or %NULL. * @error: Return location for error or %NULL. * Synchronously deletes a given bearer from the #MMModem. * * The calling thread is blocked until a reply is received. See mm_modem_delete_bearer() * for the asynchronous version of this method. * * Returns: (skip): %TRUE if the bearer was deleted, %FALSE if @error is set. */ gboolean mm_modem_delete_bearer_sync (MMModem *self, const gchar *bearer, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_delete_bearer_sync (self, bearer, cancellable, error); } void mm_modem_reset (MMModem *self, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_reset (self, cancellable, callback, user_data); } gboolean mm_modem_reset_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_reset_finish (self, res, error); } gboolean mm_modem_reset_sync (MMModem *self, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_reset_sync (self, cancellable, error); } void mm_modem_factory_reset (MMModem *self, const gchar *code, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_factory_reset (self, code, cancellable, callback, user_data); } gboolean mm_modem_factory_reset_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_factory_reset_finish (self, res, error); } gboolean mm_modem_factory_reset_sync (MMModem *self, const gchar *code, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_factory_reset_sync (self, code, cancellable, error); } gboolean mm_modem_set_allowed_modes_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_set_allowed_modes_finish (self, res, error); } void mm_modem_set_allowed_modes (MMModem *self, MMModemMode modes, MMModemMode preferred, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_set_allowed_modes (self, modes, preferred, cancellable, callback, user_data); } gboolean mm_modem_set_allowed_modes_sync (MMModem *self, MMModemMode modes, MMModemMode preferred, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_set_allowed_modes_sync (self, modes, preferred, cancellable, error); } gboolean mm_modem_set_allowed_bands_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_set_allowed_bands_finish (self, res, error); } void mm_modem_set_allowed_bands (MMModem *self, MMModemBand bands, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { g_return_if_fail (MM_GDBUS_IS_MODEM (self)); mm_gdbus_modem_call_set_allowed_bands (self, bands, cancellable, callback, user_data); } gboolean mm_modem_set_allowed_bands_sync (MMModem *self, MMModemBand bands, GCancellable *cancellable, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), FALSE); return mm_gdbus_modem_call_set_allowed_bands_sync (self, bands, cancellable, error); } static void modem_get_sim_ready (GDBusConnection *connection, GAsyncResult *res, GSimpleAsyncResult *simple) { GError *error = NULL; MMSim *sim; sim = mm_gdbus_sim_proxy_new_finish (res, &error); if (error) g_simple_async_result_take_error (simple, error); else g_simple_async_result_set_op_res_gpointer (simple, sim, NULL); g_simple_async_result_complete (simple); g_object_unref (simple); } void mm_modem_get_sim (MMModem *self, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data) { GSimpleAsyncResult *result; const gchar *sim_path; g_return_if_fail (MM_GDBUS_IS_MODEM (self)); result = g_simple_async_result_new (G_OBJECT (self), callback, user_data, mm_modem_get_sim); sim_path = mm_modem_get_sim_path (self); if (!sim_path) { g_simple_async_result_set_op_res_gpointer (result, NULL, NULL); g_simple_async_result_complete_in_idle (result); g_object_unref (result); return; } mm_gdbus_sim_proxy_new ( g_dbus_proxy_get_connection ( G_DBUS_PROXY (self)), G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, MM_DBUS_SERVICE, sim_path, cancellable, (GAsyncReadyCallback)modem_get_sim_ready, result); } MMSim * mm_modem_get_sim_finish (MMModem *self, GAsyncResult *res, GError **error) { g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); if (g_simple_async_result_propagate_error (G_SIMPLE_ASYNC_RESULT (res), error)) return NULL; return g_simple_async_result_get_op_res_gpointer (G_SIMPLE_ASYNC_RESULT (res)); } MMSim * mm_modem_get_sim_sync (MMModem *self, GCancellable *cancellable, GError **error) { const gchar *sim_path; g_return_val_if_fail (MM_GDBUS_IS_MODEM (self), NULL); sim_path = mm_modem_get_sim_path (self); if (!sim_path) return NULL; return (mm_gdbus_sim_proxy_new_sync ( g_dbus_proxy_get_connection ( G_DBUS_PROXY (self)), G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START, MM_DBUS_SERVICE, sim_path, cancellable, error)); } /** * mm_modem_get_capabilities_string: * @caps: Bitmask of #MMModemCapability flags. * * Build a string with a list of capabilities. * * Returns: (transfer full): A string specifying the capabilities given in @caps. The returned value should be freed with g_free(). */ gchar * mm_modem_get_capabilities_string (MMModemCapability caps) { return mm_common_get_capabilities_string (caps); }