aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-06-06charsets: new utf8_to_hex() methodAleksander Morgado
2011-06-06gsm: let plugins use their own command for CMER enablingAleksander Morgado
2011-06-06gsm: let plugins use their own commands for SMS indications and storage ↵Aleksander Morgado
configuration
2011-06-05core: allow plugins to stop probing and not support a modemDan Williams
Previously plugins could only stop probing, *or* stop probing and indicate support for a device. For the Alcatel X200/X060s debacle we need to stop probing and indicate that the plugin does not support the device at all.
2011-06-05core: ensure ERROR_REMOVED error is used in MMCallbackInfo when detecting ↵Aleksander Morgado
modem removal
2011-06-05core, plugins: if modem removed don't process responseAleksander Morgado
We try to avoid a memory leak when info->error is reset, as well as a second re-schedule of the info.
2011-06-02gsm: free the string allocated by utils_hexstr2bin().Nathan Williams
Change-Id: I1f7dabc8209d9757b573a59abb788a2346f72ad5
2011-06-02Spec out and implement a command to get a GSM SIM SPN value.Nathan Williams
Using a SIM with a SPN, run the following command: dbus-send --system --dest=org.freedesktop.ModemManager --print-reply /org/freedesktop/ModemManager/Modems/0 org.freedesktop.ModemManager.Modem.Gsm.Card.GetSpn Change-Id: I8f36c8432f40fa4e3cb3f8c6ceef16b2bdadf2a1 Reviewed-on: http://gerrit.chromium.org/gerrit/1464 Reviewed-by: Nathan J. Williams <njw@chromium.org> Tested-by: Nathan J. Williams <njw@chromium.org>
2011-06-02sms_decode_address(): Add a leading "+" on international numbers.Nathan Williams
BUG=chromium-os-partner:4278 TEST=Send SMS from phone (to get +... format) and from AIM-SMS gateway (to get raw-digit format). Change-Id: I36eb9f1432a432435578180dfdb315b0e7ee5744
2011-06-02serial-parser: allow 0 or more whitespaces before error code in regular ↵Aleksander Morgado
expresions
2011-05-27sms: use correct start and length for alphanumeric dataNathan Williams
sms_parse_pdu(): Protocol ID doesn't actually affect decoding, so don't fret about its value. ChromeOS: Change-Id: Ia4cb20c415aed1026bb7b8dd4daa8ae53dd749e8
2011-05-19gsm: correctly set registration status when disablingNathan Williams
Chromium: Change-Id: I0629706985f273832ac3662acb260388d0e6ed83
2011-05-19ussd: formatting and spacing cleanupsDan Williams
2011-05-11sms: suppress duplicate SMS received notificationsNathan Williams
If the modem sends the same notification on more than one port, make sure we don't send a signal out to clients more than once.
2011-05-09manager: avoid assertion warning when enumerating devicesAleksander Morgado
2011-05-09gsm: whitespace fixesDan Williams
2011-04-29utils: new utils_check_for_single_value() methodAleksander Morgado
It was being used in several places with different static implementations
2011-04-29gsm: allow setting more than one bandAleksander Morgado
2011-04-26plugins: allow multiple custom init commands in sequenceDan Williams
Huawei will need this.
2011-04-26plugins: simplify custom init commandsDan Williams
Instead of having two places that custom init stuff got processed (a hook in the MMPluginBase class itself and a callback too) just use a callback, and simplify it somewhat so that the plugin tracks how many tries it cares about and what to do based on the response or error.
2011-04-18core: tear down all pending work when closing a portDan Williams
Make sure all pending work, if any, is torn down when closing the port, since it's closed, and is likely going to get unreffed soon and we don't want anything running after the port is dead.
2011-04-18gsm: return success if unlocked but doesn't allow subsequent CPIN commandsDan Williams
If the modem for some reason returns ERROR for a +CPIN when it's unlocked, and subsequent PIN post-unlock pin checks return READY, just treat the modem as unlocked don't return the +CPIN error.
2011-04-14Merge remote-tracking branch 'lanedo/plugin-wavecom'Dan Williams
2011-04-14gsm: implement basic SMS reception and PDU parsingNathan Williams
2011-04-14serial: ensure response array is empty before setting cached replyAleksander Morgado
2011-04-14charset: change GSM unpack to take number of characters rather than octetsNathan Williams
Change interface to take the number of GSM characters rather than the number of octets, so that it is possible to distinguish the 7-character and 8-character cases.
2011-04-14serial: ensure spew control can be changed after port is createdDan Williams
Since we don't allow properties to be passed into the serial port create routines we don't want a construct-only property here.
2011-04-14serial: allow spew control to be turned offNathan Williams
It's only used during probing where some port types (Sierra CnS and some Icera devices) may send streams of data that we can't understand until we close the port. It interferes with some SMS operations, so turn it off for ports opened after probing.
2011-04-11gsm: handle UMTS 2600 internal bandAleksander Morgado
2011-04-11wavecom: handle READY without OK in CPIN? replyAleksander Morgado
2011-04-08serial: allow plugins to specify probe-time send_delayDan Williams
Let modems we know don't suck use a zero send-delay at probe time, which greatly reduces time required to probe AT-compatible ports.
2011-04-08gsm: make sure verbose error reporting is enabled before checking PINDan Williams
Otherwise we don't get the expected "Incorrect password" error if the PIN is wrong, just a generic error.
2011-04-08serial: send entire command in one write if send_delay is 0 (chromium:13506)Dan Williams
Avoids additional USB latency and groups the whole command into one USB packet. BUG=chromium-os:13506
2011-04-07sms: don't try to destroy NULL hash tablesNathan Williams
2011-04-06serial: allow user to provide custom regex for successful and error repliesAleksander Morgado
New mm_serial_parser_v1_set_custom_regex() method.
2011-04-06modem-base: allow NULL ports in get_card_info() if port_error givenAleksander Morgado
So that cached values can be returned if querying while the port is connected.
2011-04-06serial: don't let EAGAIN block sending commands until completionDan Williams
If a port returns EAGAIN on write attempts, previously the code would spin and attempt to resend the failed byte after send_delay microseconds. This resulted in up to 3 second hard blocks in the serial code when sending to ports that don't respond. While in this blocking loop no other events or dbus commands could be processed. Instead, send each byte and reschedule sending the next byte in send_delay microseconds, so that we can process other events in between attempts to write to stupid ports. This doesn't hugely decrease the amount of time that probing requires, since we still need to probe all ports of the device before exporting the modem to D-Bus, but it does let MM find responsive ports much more quickly, and ensures that MM doesn't block any D-Bus requests.
2011-04-04generic-gsm: make flow control setup command a propertyAleksander Morgado
2011-03-31core: make modem StateChanged signal consistent with API documentationJason Glasgow
The new and old state arguments were flipped.
2011-03-27samsung: drop PORT_TYPE_ECMDan Williams
Isn't really needed since it's just the same as any other net device port type.
2011-03-11modemmanager: Add support for Samsung Y3300 modemJun Woo Lee
BUG=chrome-os-partner:2394 TEST=gmerge modemmanager, watch logs, see detected as Samsung modem, connect to AT&T network Review URL: http://codereview.chromium.org/6614026 Patch from Jun Woo Lee <jw86.lee@samsung.com>. Change-Id: I913628ff4a1cd16c8180e3c808644b0134e69e31
2011-03-11gsm: fix for parsing malformed Gobi CREG responseDan Williams
From an HP un2400; GMR: D1020-SUUAASFA-4352 1 [Apr 14 2008 18:00:00] GMM: 88
2011-03-11core: allow plugins to handle custom init responsesThomas Bechtold
2011-02-25logging: use glong for secs and usecsMichael Biebl
2011-02-25cdma: ensure the ActivationStateChanged signal existsDan Williams
It's part of the D-Bus API, so it needs to be implemented somewhere even if it's not used yet.
2011-02-25log: fix spacing so messages line upDan Williams
2011-02-10core: allow platform devices without a VID/PIDTom Bechtold
Since platform devices don't usually have them.
2011-01-24api: fix up StateChanged duplicate reason codeDan Williams
And add new reason codes to the C headers.
2011-01-24logging: make gcc 4.4.3 happy about ignored unused resultsDan Williams
2011-01-24logging: shut up compiler warnings about unused result from write(2)Dan Williams
We actually don't care about the result here. But we do in other places, so we want to keep the warning in general.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-06-14 20:55:57 +0000