Age | Commit message (Collapse) | Author |
|
By default, fallback to "unknown" mobile equipment error when the
modem gets disconnected by the network and we don't have any way to
know a more detailed reason.
|
|
Update the list of mobile equipment error codes according to v17.1.0
of 3GPP TS 27.007 (March 2021).
A lot of the enum values that were prefixed with the 'GPRS_' keyword
have now been flagged as deprecated, and a new enum name given to the
corresponding value.
The deprecated symbol names are kept in the compat support to avoid
breaking API/ABI.
|
|
Use the new "DMS Foxconn Set FCC authentication" command to request
the modem unlock during a power up operation.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/373
|
|
If ModemManager is not built with QMI support, the generic MBIM modem
object will not have any location support, so we cannot assume that
iface_modem_location_parent will be valid and that it will have all
load_location_capabilities(), enable_location_gathering() and
disable_location_gathering() implemented.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/362
|
|
This is now a requirement when using glib 2.56.
|
|
Based on the QDU service newly added in libmbim,
T99W175 module (vid: 0x105b) supports MBIM QDU based update.
|
|
Using AT%IPDPCFG for authentication related profile settings
management (querying, updating), and relying on the parent
implementation for the remaining ones.
And using AT%IPDPACT for activation status management (deactivate),
while relying on the parent implementation for the activated check.
|
|
There is no longer need to perform all the CID selection logic in the
broadband bearer connection procedure, we can rely on the new profile
management operations to do the same thing.
We can do this because we're sure that all the MMBroadbandModem
objects implement the MMModem3gppProfileManager interface.
Additionally, given that we now provide the profile ID value as part
of the MMBearerConnectResult, we no longer need a custom
mm_broadband_bearer_get_3gpp_cid() as we can use the generic
mm_base_bearer_get_profile_id() for the same purpose.
|
|
0x0489 is the vendor ID of T77W968, 0x105b is the vendor ID of T99W175.
{0x105b, 0xe0b0},{0x105b, 0xe0b1} is T99W175 PCI device, used by Dell.
{0x105b, 0xe0ab} is T99W175 PCI device, used by Lenovo.
If the modem has an mbim port, create a MbimFoxconn object, regardless
of what the product ID is.
The firmware version format in the T99W175 was selected to have
firmware version + carrier config version + apps version.
|
|
Named the object in a more generic way.
|
|
wwan is a new subsystem for WWAN devices, allowing to expose the
WWAN device and its ports in a generic way.
The sysfs hierarchy for such device is
/sys/class/wwanX
/sys/class/wwanX/wwanXpYP
Where X is the WWAN device index, Y the port index and P the
control protocol name (QMI, MBIM...). A control port is also
exposed as character device in /dev.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
|
|
Quectel modems require to enable XTRA GNSS assistance first with QGPSXTRA=1, before it can be used.
|
|
|
|
|
|
|
|
There is no point in providing a configurable default IP family in the
bearer object, because we can always assume IPv4 as being the only
default expected.
Simplify the logic and also provide a new method to get the normalize
the IP family, using IPv4 as default always.
|
|
Looks like the logic is just there to write a debug log, as the
selected IP family is not used anywhere else. Just remove this.
|
|
The g_regex_match_full() method may return FALSE without setting the
GError, so that case needs to be considered.
In addition to that, the following g_assert() was not doing what it
should have been, as it was comparing the address of the variable and
not the variable itself; rework the code to avoid that as well:
g_assert (access_tech != MM_MODEM_ACCESS_TECHNOLOGY_UNKNOWN);
|
|
The g_regex_match_full() method may return FALSE without setting the
GError, so that case needs to be considered.
Reported by Jan Mazura.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/347
|
|
E.g. in a Cinterion PLS8-E (REVISION 04.004) to match the following
line:
^SCFG: "MEopMode/Prov/Cfg","fallback*"
Fix suggested by Jan Mazura.
See https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/347
|
|
QGPSURCs are not ignored and causes calls to be rejected in some cases
|
|
Using CPOL? in the EM7345 (firmware FIH7160_V1.1_MODEM_01.1349.12)
ends up with the whole AT port stuck and non-responsive, which leads
to flagging the modem as unusable later on as soon as 10 consecutive
AT command timeouts happen.
In order to avoid that, we explicitly disable all CPOL based features
in this specific module.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/336
|
|
Both the Simple.Connect() and Modem.CreateBearer() are updated to
allow a new 'multiplex' setting in the properties provided by the user
in both of these methods.
The new setting expects a MMBearerMultiplexSupport enum indicating
what kind of multiplex needs the user has:
* none: if multiplex must not be used.
* requested: if multiplex should be used if available.
* required: if multiplex must be used.
The underlying implementations will take care of accepting or
rejecting the setting depending on the system and modem capabilities.
|
|
It looks like when indicators are enabled in ZTE modems like the
MF833V, the whole connection process is very unstable. The AT
reference doesn't do any mention to +CIND/CMER/CIEV either, so we'll
just disable all and use +CSQ based signal loading.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/303
Signed-off-by: Louis-Alexis Eyraud <louis-alexis.eyraud@sigfox.com>
|
|
A modem that creates exclusively bearer objects that work with NET
ports (e.g. all QMI or MBIM modems) must not add any TTY port in the
list of data ports.
A modem that creates exclusively bearer objects that work with TTY
ports (e.g. the generic modem) must not add any NET port in the
list of data ports.
A modem that may use both TTY and NET ports should add all in the list
of data ports.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/324
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/329
|
|
|
|
There's no point in returning a list of all ports with a given name,
just provide a lookup method that returns the single port with the
given name.
|
|
We already have methods to query for interface specific attributes
like class/subclass/protocol, so add a new one for the interface
number, and make sure we use ATTRS{bInterfaceNumber} to load it
always, instead of assuming the ID_USB_INTERFACE_NUM property is set.
|
|
|
|
Also providing support to report errors when attempting to decode the
strings.
|
|
Instead of blindly assuming that we can take whatever string given as
valid UTF-8, we'll always attempt to convert from the current modem
charset into UTF-8. Before we were doing this for hex-encoded UCS2,
but not for example for GSM-7.
And due to the now applied GSM-7 conversion, the mf627a/mf627b +COPS
parsing unit tests are updated accordingly, because when converting
from an input string that contains byte 0x40 ('@' in UTF-8) as if it
were GSM-7, the 0x40 is taken as character '¡', encoded as 0xc2,0xa1
in UTF-8).
|
|
The sequence of commands is exclusively used during the set current
bands operation, so there is no point in storing it in the private
object data.
|
|
take_and_convert_to_current_charset()
|
|
Use the generic mm_modem_charset_bytearray_to_utf8() instead.
|
|
Use the generic mm_modem_charset_bytearray_from_utf8() instead.
|
|
If the conversion is not fully compatible, the user of the method
needs to request transliteration enabled explicitly in order to avoid
returning errors in this method.
|
|
Until now, this method would automatically apply transliteration;
i.e. replacing characters with '?' when no direct translation was
available.
We can attempt to do that transliteration on strings that are not
critical, e.g. the operator name reported by the network. But we
should not do that on other types of strings, e.g. on SMS contents
that may really have additional purposes than just being
human-readable.
This commit makes the transliteration option to be explicitly
requested by the caller.
|
|
It makes much more sense than returning a gchar array, as gchar is
signed.
|
|
Optionally given explicitly, and -1 can be used to assume it's
NUL-terminated.
|
|
This util method checks whether the input string is a valid hex
string, so make sure we return a GError on failure.
|
|
|
|
During disabling of gps sources the bitmask that keeps track of them is
updated incorrectly. Instead of removing the current source, all other
sources are removed from the mask.
One problem that arises from this is, that when you enable GPS after it
has been disabled completely (e.g. by disabling all GPS sources), the
code will not send a "+CGPS=1,1" command because it incorrectly assumes
that GPS is still enabled on the device.
|
|
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/306
Signed-off-by: Louis-Alexis Eyraud <louis-alexis.eyraud@sigfox.com>
|
|
The _get_port_gps() returns a full reference, use _peek_port_gps()
instead.
See https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/302
|
|
The parse_vendor_pco_info() method was returning NULL without error if
the pco info string was empty.
Under this situation, the code would have tried to add a NULL MMPco
into the pco_list list, which is not desired.
Avoid this, by making sure a NULL return always sets an error.
|
|
|
|
|
|
|
|
This property (initially set to FALSE) controls whether QMI over MBIM
should never be considered. This property is set to TRUE for XMM-based
MBIM devices as they don't support QMI.
This fixes a probing delay of 15s on a Fibocom L850-GL device
(2cb7:0007) found in the Lenovo T14 Gen 1.
The establishing of a QMI connection was refused multiple time with
MBIM error OperationNotAllowed. Only the timeout of 15s for this
connection resumed the probing.
The properties in the MMBroadbandModemMbim are only installed when
WITH_QMI and QMI_MBIM_QMUX_SUPPORTED are set. Actually, this should only
disable the PROP_QMI_UNSUPPORTED but as this is the only property this
avoids the "unused variable 'self'" warnings/errors when trying to
compile set_property and get_property without QMI support. This can be
changed once other properties are needed.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/284
|
|
|