| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Lukas Voegl <lvoegl@tdt.de>
|
|
|
|
The libmm-glib library is LGPLv2+, not GPLv2+.
|
|
|
|
In addition to the amount of bearers a user may connect without
multiplexing enabled (the default until now), we now also expose the
maximum number of bearers a user may connect after enabling
multiplexing over one single network interface (if supported).
The method responsible for creating the MMBearerList is now also
subclassable, so that implementations supporting multiplexing can
provide their own version with their own thresholds.
|
|
This property was never initialized with a correct value, we would
always use the same value as used for MaxActiveBearers, which isn't
technically right. Just suggest to ignore this property, and flag
it as deprecated.
In addition to deprecating the API property, we will internally no
longer limit the amount of bearer objects that may be created with
different connection settings. The bearer object exposed in DBus is a
representation of the connection that may be setup, and so we can hold
as many representations as we want as long as the amount of connected
bearers doesn't exceed the maximum amount for each modem.
Leaving around the disconnected modems also serves another purpose.
Each bearer holds information about the amount of times a connection
with it has been attempted, and the amount of data transferred through
it. If we use the Simple.Connect() method to connect the modem using
different bearer settings, we won't lose the information of the past
connection attempts with different settings.
|
|
This new method allows changing the SIM slot considered as primary,
when the modem supports multiple SIM slots.
The generic handling of this method will make sure that the modem
object and all its SIM objects are re-probed from scratch as soon as a
successful SIM slot switch happens.
Implementations may report MM_CORE_ERROR_EXISTS when the switch
doesn't need to happen (e.g. if the requested SIM slot is already the
active one).
|
|
The 'SimSlots' property exposes an array of SIM object paths, with one
array item for each available SIM slot in the system. If a valid SIM
card is found in a given slot, the path of the SIM object will be
exposed in the array item; if no valid SIM card is found, the empty
object path ("/") will be exposed instead.
The 'PrimarySimSlot' property exposes which of the SIM slots available
in the system is the one configured as being primary. In a Multi-SIM
Single-Standby setup, the primary slot will be the one corresponding
to the single active SIM in the system. In a Multi-SIM Multi-Standby
setup, the primary slot will be the one configured to act as primary
(e.g. the one that will be used for the data connection) among all the
active SIM cards found.
|
|
As we now depend on glib 2.48
|
|
Which reports the version of the currently active carrier
configuration.
We also update the firmware 'version' reported in the firmware
settings so that carrier-specific upgrades can be performed (e.g. when
the firmware stays the same but the MCFG is updated).
|
|
During initialization phase we will allow querying the modem for the
details of which carrier-specific configuration is being used, and
will expose a description string in the API.
In addition to showing the current configuration, we will also allow
automatically switching the configuration based on the SIM card
detected in the device. In order to allow this, plugins/modems will
need to provide the expected mapping between carrier config
description and MCCMNC. This mapping cannot be generic, because
different manufacturers may use different description strings.
|
|
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/100
|
|
|
|
|
|
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
|
|
For those modems which expose a valid 'SupportedCapabilities' property with more
than one item in the list, we'll allow switching between them.
|
|
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
|
|
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
|
|
Instead of just a mask of MMModemMode values, we now provide a list of the
allowed and preferred mode combinations supported by the modem. E.g.:
$> sudo mmcli -m 0
-------------------------
Modes | supported: 'allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 2g, 3g; preferred: none
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 3g; preferred: 3g
| allowed: 4g; preferred: none
| allowed: 2g, 3g, 4g; preferred: none'
|
|
... and 'SetBands()' to 'SetCurrentBands()'.
We'll keep the 'Current' keyword in those properties which also have
'Supported' values.
|
|
|
|
We currently implement 'SIM missing' and 'SIM error', which are probably the
most common ones.
|
|
|
|
We do need to specify which is the primary port being used for controlling the
modem. This allows us to match the device with an already existing bluetooth
device in NetworkManager.
|
|
Unless when compiling libmm-glib itself, of course.
|
|
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
|
|
Not just a typedef of the gdbus-codegen generated `MmGdbusModem'.
|
|
Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
|
|
|
|
Renamed `MMCommonBearerProperties' to `MMBearerProperties', and removed the
`MMBearerProperties' provided in libmm-glib. We'll just use the original one
from libmm-common always.
|
|
Equivalent to `PinRetryCount' in the previous API. We don't have an additional
property for the retry count of the current lock, as it really is duplicating
information.
|
|
ModemManager will load:
1) The list of supported bands. Note that this doesn't mean that any possible
combination of bands is supported, as modems may support only specific
combinations, but at least gives a rough idea of what the modem is capable
of handling.
2) The list of CURRENT bands. There is no such "Allowed" bands, as we do with
modes, modems will have a specific set of bands being currently used, which
will be reported in the `Bands' property.
If the modem allows modifying the list of bands to use, this can be done with
the `SetBands()' method. If the modem doesn't support using a specific
combination of bands, this method will report an error.
|
|
BUG=chromium-os:25348
TEST="mmcli -m 0 --command='E0'"
Change-Id: I320587560fde5780f9d5a4998e32364d36a71ed7
|
|
|
|
|
|
|
|
|
|
We don't want to handle bands as flags, in order to avoid the need of 64-bits
for the enum. This change implies that setting allowed bands will be done by
giving an array of uint32 values, signature "au".
|
|
|
|
|
|
This one was the last enum without full name.
|
|
We are reporting a bitmask of flags, not just one value.
|
|
|
|
|
|
|
|
|
|
Avoid trying to merge all interfaces into the same set of APIs, and keep having
a specific object (proxy) for each interface handled by the GDBusObjects
reported listed by the GDBusObjectManager.
|
|
|
|
|
|
|
