| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This new flag allows users of the API to know whether general purpose
voice calls are allowed or otherwise only voice calls to the
registered emergency numbers should be performed.
ModemManager won't really do any distinction between emergency and
non-emergency calls at this point, this flag is just an early
indication for the user of the API that no normal voice call should be
attempted.
|
|
|
|
These new methods allow querying and updating the status of the call
waiting network service, as per 3GPP TS 22.083.
The status of the service is not a property because we don't want to
unconditionally load it on every boot, given that the process involves
talking to the network (i.e. it is not a device setting).
|
|
The GSM supplementary services related changes, as well as the rework
done to manage calls per call id, is copyrighted by Purism SPC.
|
|
|
|
It will be set to TRUE if this call is part of a multiparty call.
|
|
This method allows deflecting an incoming or waiting call to a
different number.
|
|
This method will join all active and held calls into a single
multiparty call, and then request the network to terminate the call on
the subscriber's end and transfer the control of the call to the
parties that are still in the call.
|
|
This method will terminate all ongoing calls.
|
|
This method will put the currently active call on hold, and right away
accept the next available call.
The user of the API does not need to specify explicitly which is the
next call to accept, because that is decided automatically:
* If there is any waiting call, it will accept it right away.
* If there is no waiting call but there is a held call, it will make
the held call active again.
|
|
This method will hangup the currently active call and right away
accept the next available call.
The user of the API does not need to specify explicitly which is the
next call to accept, because that is decided automatically:
* If there is any waiting call, it will accept it right away.
* If there is no waiting call but there is a held call, it will make
the held call active again.
|
|
|
|
|
|
|
|
The A-GPS based implementations we currently have assume MSA A-GPS, so
rename the MMModemLocationSource enum value to reflect that.
|
|
Which reports the version of the currently active carrier
configuration.
We also update the firmware 'version' reported in the firmware
settings so that carrier-specific upgrades can be performed (e.g. when
the firmware stays the same but the MCFG is updated).
|
|
During initialization phase we will allow querying the modem for the
details of which carrier-specific configuration is being used, and
will expose a description string in the API.
In addition to showing the current configuration, we will also allow
automatically switching the configuration based on the SIM card
detected in the device. In order to allow this, plugins/modems will
need to provide the expected mapping between carrier config
description and MCCMNC. This mapping cannot be generic, because
different manufacturers may use different description strings.
|
|
|
|
|
|
This new method allows users of the ModemManager API to take full
control of a given device.
Unlike other operations in the API, the inhibition is maintained as
long as the caller exists in the bus, or until the same caller
uninhibits the device.
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/98
|
|
Devices may require/support more than one update method, so instead of
reporting the method as a single enum value, use a set of flags
instead.
|
|
|
|
|
|
|
|
|
|
This method allows users to modify the settings used during the
initial LTE attach procedure.
|
|
This property shows the settings stored in the device to be used
during the initial LTE attach procedure.
|
|
This property contains the DBus path of a Bearer object of type
MM_BEARER_TYPE_DEFAULT_ATTACH, which is automatically exposed by the
modem when registered in the LTE network.
Unlike standard bearer objects created by the user, this bearer won't
allow any connection/disconnection request, as its status is bound to
the LTE registration exclusively.
The bearer settings exposed by the object include the APN details that
have been used during the initial packet network attach, which may be
defined by modem settings (e.g. if previously configured in the
firmware which APN to use for the given SIM card operator) or by the
network itself (e.g. if none configured, or if a network override is
required as when roaming).
The bearer object will be created as soon as the LTE attach status
details are known, and only while the modem is enabled. The
implementation allows modems to update the LTE attach status details
during runtime, so the bearer object with the settings may be
recreated during runtime as well.
|
|
Until now we have only allowed to use and setup 'default bearers' (in
4G) or 'primary contexts' (in 2G/3G).
We can define a couple of additional bearer types, though:
* The 'dedicated bearers' (in 4G) or 'secondary contexts' (in 2G/3G),
which are associated to a specific default/primary one, but which
provide specific QoS settings configured via traffic flow templates.
* The 'initial default EPS bearer', which is a special case of default
bearer in LTE, which is automatically created and connected when the
modem is registered in the LTE network.
This commit introduces a new 'MMBearerType' enumeration that will be
associated to each bearer through a 'BearerType' property in the
org.freedesktop.ModemManager1.Bearer interface, showing what kind of
bearer/context this is.
By default, right now, all bearer objects created are 'default'
bearers.
|
|
This string shows the runtime version of the ModemManager daemon.
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/94
|
|
This method is completely unnecessary as we have the readable Bearers
property already in place, so let's deprecate it.
Worth noting that the mm_modem_list_bearers() async/sync methods in
libmm-glib were not really using the ListBearers() method anyway, they
are using the property directly. These methods are NOT deprecated,
because they allow us to get a list of MMBearer objects, instead of
just the list of DBus paths that we get when reading the Bearers
property directly.
We also remove --list-bearers from the mmcli operation list as we have
already the same information in the standard modem output.
|
|
|
|
|
|
Devices will expect SUPL server given as either IP:PORT or FQDN:PORT,
so just avoid saying we require a 'URL' because it's not true.
We will use a new helper method to parse and validate user-provided
SUPL server address.
|
|
Sometimes SUPL-server based A-GPS is not possible, e.g. if the module
doesn't have Internet connectivity. In such cases, the modem may
support injecting additional "assistance data" that may be downloaded
from the Internet using external means (e.g. WiFi), in order to keep
having a quick time to first fix.
We now support using this location assistance data, with the following
new API elements:
* A new mask of supported assistance data types is provided in the
SupportedAssistanceData property.
* A new list of URLs from where the aassistance data may be
downloaded is also provided in a new AssistanceDataServers
property.
* A new InjectAssistanceData() method is provided, to perform the
data injection in the module once it's been downloaded to the host
system.
|
|
This patch adds a 'Pco' property to the Modem3gpp interface for tracking
PCOs that the modem has received from the network.
|
|
The "location area code" field is given in GSM/UMTS networks
exclusively. LTE networks use the concept of "tracking area code"
instead.
This patch updates the Location interface to Provide separate fields
for LAC and TAC, instead of giving TAC values in the LAC field.
|
|
|
|
property
|
|
The UE modes of operation for LTE are defined in 3GPP TS 24.301 (e.g.
section 4.3 in v10.3.0):
* PS mode 1: EPS only, 'voice centric'
* PS mode 2: EPS only, 'data centric'
* CS/PS mode 1: EPS and non-EPS, 'voice centric'
* CS/PS mode 2: EPS and non-EPS, 'data centric'
The mode specifies, among other things, how the UE should behave w.r.t
CS fallback depending on the capabilities reported by the network.
|
|
This property will let the clients know the hardware revision reported
by the modem.
|
|
And avoid including the wip-* XMLs in the dist tarball.
|
|
Looks like gdbus-codegen ends up making paragraphs and that breaks the
XML parsing:
DOC Building HTML
../../../../libmm-glib/generated/mm-gdbus-doc-org.freedesktop.ModemManager1.xml:60: parser error : Opening and ending tag mismatch: variablelist line 59 and para
</para><para> <varlistentry><term><literal>action</literal></term>
^
../../../../libmm-glib/generated/mm-gdbus-doc-org.freedesktop.ModemManager1.xml:110: parser error : Opening and ending tag mismatch: para line 110 and variablelist
</para><para> </variablelist>
^
../xml/ModemManager-dbus-reference.xml:93: element include: XInclude error : could not load ../../../../libmm-glib/generated/mm-gdbus-doc-org.freedesktop.ModemManager1.xml, and no fallback was found
|
|
|
|
This commit enables a new core ModemManager daemon option, so that automatic
detection of available modems is totally disabled: '--no-auto-scan'. Note that
this option also replaces the previously used '--test-no-auto-scan' option,
which was only used during tests.
Along with the new ModemManager option, a new ReportKernelEvent() method in
the API is defined, which allows notifying the daemon of which interfaces it
should be accessing, as well as the main details of each interface. The only
mandatory parameters in the new method are 'action' (add/remove), 'name' (the
name of the interface) and 'subsystem' (the subsystem of the interface).
The mmcli tool has support for using the new api method via several new options:
* The '--report-kernel-event' option allows specifying device ports one by
one, and is a direct mapping of the ReportKernelEvent() method:
$ sudo mmcli --report-kernel-event="action=add,name=wwan0,subsystem=net"
$ sudo mmcli --report-kernel-event="action=add,name=cdc-wdm0,subsystem=usbmisc"
* The '--report-kernel-event-auto-scan' option uses udev monitoring to notify
events automatically to the daemon. This allows to operate in a way
equivalent to the default daemon operation (with implicit auto-scan).
Worth noting that the ReportKernelEvent() method is only usable when
'--no-auto-scan' is explicitly used in the daemon. An error will be reported if
the method is tried while standard udev monitoring is enabled (implicit if
auto scan isn't explicitly disabled in the daemon).
If mmcli is going to be used only to report 'real time' events, an optional
'--initial-kernel-events=[PATH]' may be given in the ModemManager call to
automatically process a set of port kernel events one by one on boot. The file
may e.g. contain:
action=add,name=wwan0,subsystem=net
action=add,name=cdc-wdm0,subsystem=usbmisc
|
|
|
|
|
|
The default setup uses a refresh time of 30s, which means that even if the GPS
location updates are received at a higher frequency, the DBus interface will
still expose at most one update every 30s.
This patch includes a new "SetGpsRefreshTime()" method in the Location
interface, which takes a single 'u' parameter, specifying the refresh rate to
use, in seconds. This method also allows 0 being passed, which will make the
implementation to publish the GPS location updates are soon as ModemManager
detects them.
Along with the new method, a "GpsRefreshTime" read-only property is exposed
to specify the refresh time in effect.
The new method and property will only be applicable if the device has GPS
capabilities.
https://bugs.freedesktop.org/show_bug.cgi?id=89924
|
