| Age | Commit message (Collapse) | Author |
|---|
|
This tag is completely redundant because users can whitelist the
platform TTY ports to use with the more generic ID_MM_DEVICE_PROCESS
tag, which is part of the explicit whitelist filter rule.
|
|
The udev tag that allows flagging devices that MAY be modems
(e.g. USB<->RS232 adapters) is only applicable to TTY devices, so
explicitly specify that in the tag name as well.
|
|
Until now the ID_MM_DEVICE_IGNORE udev tag was being used in the
internal blacklist of devices shipped by ModemManager when running in
either DEFAULT or PARANOID filter modes. The name of the tag is
extremely misleading because it doesn't really make the full device be
ignored, the tag only applied to TTY ports.
This commit repurposes the tag so that it applies to ANY kind of
port (e.g. TTY, NET, cdc-wdm...) and also to any kind of filter type
(i.e. also applicable in STRICT mode).
The internal blacklist shipped by ModemManager, which should NOT be
used in STRICT mode, uses a new tag name, ID_MM_TTY_BLACKLIST.
The new ID_MM_DEVICE_IGNORE tag is therefore much more usable and its
name is really meaningful. If there are users or third-party projects
adding their own udev rules with the ID_MM_DEVICE_IGNORE tag name,
they should have no problem as the new rule is more restrictive than
the old one.
|
|
This method allows deflecting an incoming or waiting call to a
different number.
|
|
This method will join all active and held calls into a single
multiparty call, and then request the network to terminate the call on
the subscriber's end and transfer the control of the call to the
parties that are still in the call.
|
|
|
|
|
|
|
|
|
|
|
|
Much clearer to understand when looping through them.
|
|
The A-GPS based implementations we currently have assume MSA A-GPS, so
rename the MMModemLocationSource enum value to reflect that.
|
|
|
|
Devices may require/support more than one update method, so instead of
reporting the method as a single enum value, use a set of flags
instead.
|
|
|
|
Until now we have only allowed to use and setup 'default bearers' (in
4G) or 'primary contexts' (in 2G/3G).
We can define a couple of additional bearer types, though:
* The 'dedicated bearers' (in 4G) or 'secondary contexts' (in 2G/3G),
which are associated to a specific default/primary one, but which
provide specific QoS settings configured via traffic flow templates.
* The 'initial default EPS bearer', which is a special case of default
bearer in LTE, which is automatically created and connected when the
modem is registered in the LTE network.
This commit introduces a new 'MMBearerType' enumeration that will be
associated to each bearer through a 'BearerType' property in the
org.freedesktop.ModemManager1.Bearer interface, showing what kind of
bearer/context this is.
By default, right now, all bearer objects created are 'default'
bearers.
|
|
|
|
This prevents errors due to nasty typos in the strings.
We define all symbols in a single header file that is NOT considered
part of the API, as there is no need for MM clients to know about
these tags code-wise. These tags are only meaningful when associated
to devices in udev.
Information of each tag is included in the general API documentation.
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/88
|
|
|
|
Sometimes SUPL-server based A-GPS is not possible, e.g. if the module
doesn't have Internet connectivity. In such cases, the modem may
support injecting additional "assistance data" that may be downloaded
from the Internet using external means (e.g. WiFi), in order to keep
having a quick time to first fix.
We now support using this location assistance data, with the following
new API elements:
* A new mask of supported assistance data types is provided in the
SupportedAssistanceData property.
* A new list of URLs from where the aassistance data may be
downloaded is also provided in a new AssistanceDataServers
property.
* A new InjectAssistanceData() method is provided, to perform the
data injection in the module once it's been downloaded to the host
system.
|
|
They were reversed; ringing in applies to incoming calls, ringing out
applies to outgoing calls.
|
|
|
|
From 3GPP TS 27.007 version 11.6.0 Release 11, sections 9.2.1,
9.2.2.1, 9.2.2.2, and 9.2.2.3.
|
|
We should only depend on GLib on the libmm-glib headers. Otherwise,
packages using just the core headers (e.g. ModemManagerQt) would also
need to build-depend on GLib and we don't want to enforce that.
cd ~/buildroot/output/build/kde-modemmanager-qt-v5.36.0/src && ~/buildroot/output/host/usr/bin/arm-cortexa9_neon-linux-gnueabihf-g++ .... -fPIC -o CMakeFiles/KF5ModemManagerQt_static.dir/bearer.cpp.o -c ~/buildroot/output/build/kde-modemmanager-qt-v5.36.0/src/bearer.cpp
In file included from ~/buildroot/output/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/ModemManager/ModemManager.h:41:0,
from ~/buildroot/output/build/kde-modemmanager-qt-v5.36.0/src/generictypes.h:27,
from ~/buildroot/output/build/kde-modemmanager-qt-v5.36.0/src/generictypes.cpp:23:
~/buildroot/output/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include/ModemManager/ModemManager-compat.h:23:18: fatal error: glib.h: No such file or directory
compilation terminated.
|
|
|
|
The UE modes of operation for LTE are defined in 3GPP TS 24.301 (e.g.
section 4.3 in v10.3.0):
* PS mode 1: EPS only, 'voice centric'
* PS mode 2: EPS only, 'data centric'
* CS/PS mode 1: EPS and non-EPS, 'voice centric'
* CS/PS mode 2: EPS and non-EPS, 'data centric'
The mode specifies, among other things, how the UE should behave w.r.t
CS fallback depending on the capabilities reported by the network.
|
|
When this symbol is defined, e.g. via CFLAGS, building a program that
uses the ModemManager API will fail if the program references
deprecated symbols.
For now we just use it to keep gtk-doc-scan happy and avoid
unnecessary warnings.
|
|
|
|
Define new symbols with easier names, just based on the Band Class.
|
|
|
|
Flag as deprecated the old names, and define new ones based on the
defined UTRAN band numbers, equivalent to what was done for LTE bands.
|
|
New definitions for not so common GSM frequency bands.
|
|
Using an intermediate constant variable breaks compilation with C
compilers, as these variables cannot be used as initializers.
Instead, define a deprecated type and cast all deprecated symbols to
that type. We lose the information about what the new replacement
symbol is, but we don't break compilation.
E.g.:
test.c: In function ‘main’:
test.c:8:5: warning: ‘MMModemBandDeprecated’ is deprecated [-Wdeprecated-declarations]
printf ("band: %d\n", MM_MODEM_BAND_U2100);
^~~~~~
|
|
Those Roman numeral suffixes in MM_MODEM_BAND_EUTRAN_* were replaced
with 1, 2, 3, ..., etc. This patch adds a compatibility header,
ModemManager-compat.h, to alias the old MM_MODEM_BAND_EUTRAN_* values to
the new values.
|
|
3GPP TS 36.101 Table 5.5-1 refers the E-UTRA operating bands as 1, 2, 3,
..., etc.
|
|
Introduce "sms only" and "CSFB not preferred" home/roaming states to be reported
for the CS context, while already registered on LTE.
Based on 3GPP TS 27.007 v13.5.0.
|
|
v4: modems/providers may not return DNS servers and not all modems
support DHCP, so lack of DNS servers should not indicate a bearer
IP method of "DHCP". IP config daemon/scripts already have to handle
missing DNS anyway.
v6: IPv6 requires SLAAC or DHCPv6 as part of the specification, so for
now we assume modems will support it. Provide all the info the modem
sent, but if there is any missing information use an IP method of
"DHCP" to indicate that info should be obtained via SLAAC/DHCPv6. Only
use an IP method of "STATIC" when all basic properties are given by
the modem.
|
|
|
|
|
|
But keep the retries when the frame marker isn't found.
https://bugzilla.gnome.org/show_bug.cgi?id=708861
|
|
|
|
Standard GPS setup (raw/nmea) will both enable the GPS module and take full
control of the GPS port. This prevents other processes from reading the NMEA
traces from e.g. a tty. In order to handle this, a new 'unmanaged' GPS location
source is introduced, which will just enable/disable the GPS module, without
reading anything from the GPS port. Of course, both raw/nmea and unmanaged
setups cannot be enabled at the same time.
|
|
Even if the IPv6 bearer method is DHCP, the client should use SLAAC
(eg, IPv6 Router Solicitations, Router Adverisements, and possibly
DHCPv6) to determine the correct prefix and DNS information. In
some cases, even with the DHCP method, and IPv6 "address" will be
given which should be assigned to the data port before beginning
an IP addressing as the mobile network may expect this address
to be used.
|
|
|
|
E-UTRAN operating band 44 is specified in 3GPP release 11 (see Table
5.5-1 "E-UTRA operating bands" in 3GPP TS 36.101 version 11.2.0 Release
11).
|
|
We can use these to return better error messages if an operator
does not support the default subscription APN functionality,
and the user does not give us an APN.
|
|
|
|
Will be used in 3GPP2 SMS messages.
|
|
Will be used in 3GPP2 SMS messages.
|
|
|
