| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
|
|
There is no implementation of the Contacts interface yet, just avoid exposing it
for now.
https://bugzilla.gnome.org/show_bug.cgi?id=701989
|
|
|
|
|
|
|
|
|
|
|
|
We won't allow changing modes or bands through Simple.Connect(). Applications
should instead look at the corresponding SupportedBands or SupportedModes, and
then use SetCurrentBands() or SetCurrentModes() explicitly.
|
|
For those modems which expose a valid 'SupportedCapabilities' property with more
than one item in the list, we'll allow switching between them.
|
|
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
|
|
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
|
|
Instead of just a mask of MMModemMode values, we now provide a list of the
allowed and preferred mode combinations supported by the modem. E.g.:
$> sudo mmcli -m 0
-------------------------
Modes | supported: 'allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 2g, 3g; preferred: none
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 3g; preferred: 3g
| allowed: 4g; preferred: none
| allowed: 2g, 3g, 4g; preferred: none'
|
|
... and 'SetBands()' to 'SetCurrentBands()'.
We'll keep the 'Current' keyword in those properties which also have
'Supported' values.
|
|
|
|
These diagrams are not expected to change much, so just include the generated
PNGs in the repository, and remove 'dia' from the prerequisites to build the
documentation.
|
|
|
|
We don't want to support only 'relative' validity, so don't assume that the
Validity property will always be a uint32 value.
Instead, we define the Validity propery as '(uv)' tuple, where the first value
(a MMSmsValidityType) specifies the type of validity, and the second value is
a variant formatted accordingly to what the validity type specifies (e.g. a
uint32 value if the type is MM_SMS_VALIDITY_TYPE_RELATIVE).
|
|
|
|
We currently implement 'SIM missing' and 'SIM error', which are probably the
most common ones.
|
|
|
|
Going into/outof low-power state is now a user-requested action.
|
|
|
|
|
|
We do need to specify which is the primary port being used for controlling the
modem. This allows us to match the device with an already existing bluetooth
device in NetworkManager.
|
|
For bearers using STATIC or DHCP IP method, the modem itself is the one
negotiating authentication with the network. The new `allowed-auth' property
allows users to specify which authentication method(s) are allowed to be used.
See the following NetworkManager commit for more reference:
commit 34aef8aaaa09b7473b9496aa49e550bd2def03f8
Author: Andrew Bird <ajb@spheresystems.co.uk>
Date: Thu Mar 15 16:19:43 2012 -0500
|
|
|
|
Also, make only the 'unique-id' mandatory.
|
|
|
|
|
|
|
|
|
|
And make it only available for internal ModemManager compilation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
|
|
It's pointless to have libmm-common around, just merge it into libmm-glib and
make ModemManager depend on libmm-glib directly. At the end, the non-common
stuff in libmm-glib is really minimal.
|
|
|
