| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
This method allows users to modify the settings used during the
initial LTE attach procedure.
|
|
This property shows the settings stored in the device to be used
during the initial LTE attach procedure.
|
|
This property contains the DBus path of a Bearer object of type
MM_BEARER_TYPE_DEFAULT_ATTACH, which is automatically exposed by the
modem when registered in the LTE network.
Unlike standard bearer objects created by the user, this bearer won't
allow any connection/disconnection request, as its status is bound to
the LTE registration exclusively.
The bearer settings exposed by the object include the APN details that
have been used during the initial packet network attach, which may be
defined by modem settings (e.g. if previously configured in the
firmware which APN to use for the given SIM card operator) or by the
network itself (e.g. if none configured, or if a network override is
required as when roaming).
The bearer object will be created as soon as the LTE attach status
details are known, and only while the modem is enabled. The
implementation allows modems to update the LTE attach status details
during runtime, so the bearer object with the settings may be
recreated during runtime as well.
|
|
Until now we have only allowed to use and setup 'default bearers' (in
4G) or 'primary contexts' (in 2G/3G).
We can define a couple of additional bearer types, though:
* The 'dedicated bearers' (in 4G) or 'secondary contexts' (in 2G/3G),
which are associated to a specific default/primary one, but which
provide specific QoS settings configured via traffic flow templates.
* The 'initial default EPS bearer', which is a special case of default
bearer in LTE, which is automatically created and connected when the
modem is registered in the LTE network.
This commit introduces a new 'MMBearerType' enumeration that will be
associated to each bearer through a 'BearerType' property in the
org.freedesktop.ModemManager1.Bearer interface, showing what kind of
bearer/context this is.
By default, right now, all bearer objects created are 'default'
bearers.
|
|
This string shows the runtime version of the ModemManager daemon.
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/94
|
|
|
|
|
|
|
|
|
|
|
|
Sometimes SUPL-server based A-GPS is not possible, e.g. if the module
doesn't have Internet connectivity. In such cases, the modem may
support injecting additional "assistance data" that may be downloaded
from the Internet using external means (e.g. WiFi), in order to keep
having a quick time to first fix.
We now support using this location assistance data, with the following
new API elements:
* A new mask of supported assistance data types is provided in the
SupportedAssistanceData property.
* A new list of URLs from where the aassistance data may be
downloaded is also provided in a new AssistanceDataServers
property.
* A new InjectAssistanceData() method is provided, to perform the
data injection in the module once it's been downloaded to the host
system.
|
|
This patch adds a 'Pco' property to the Modem3gpp interface for tracking
PCOs that the modem has received from the network.
|
|
|
|
|
|
The UE modes of operation for LTE are defined in 3GPP TS 24.301 (e.g.
section 4.3 in v10.3.0):
* PS mode 1: EPS only, 'voice centric'
* PS mode 2: EPS only, 'data centric'
* CS/PS mode 1: EPS and non-EPS, 'voice centric'
* CS/PS mode 2: EPS and non-EPS, 'data centric'
The mode specifies, among other things, how the UE should behave w.r.t
CS fallback depending on the capabilities reported by the network.
|
|
|
|
This property will let the clients know the hardware revision reported
by the modem.
|
|
|
|
This commit enables a new core ModemManager daemon option, so that automatic
detection of available modems is totally disabled: '--no-auto-scan'. Note that
this option also replaces the previously used '--test-no-auto-scan' option,
which was only used during tests.
Along with the new ModemManager option, a new ReportKernelEvent() method in
the API is defined, which allows notifying the daemon of which interfaces it
should be accessing, as well as the main details of each interface. The only
mandatory parameters in the new method are 'action' (add/remove), 'name' (the
name of the interface) and 'subsystem' (the subsystem of the interface).
The mmcli tool has support for using the new api method via several new options:
* The '--report-kernel-event' option allows specifying device ports one by
one, and is a direct mapping of the ReportKernelEvent() method:
$ sudo mmcli --report-kernel-event="action=add,name=wwan0,subsystem=net"
$ sudo mmcli --report-kernel-event="action=add,name=cdc-wdm0,subsystem=usbmisc"
* The '--report-kernel-event-auto-scan' option uses udev monitoring to notify
events automatically to the daemon. This allows to operate in a way
equivalent to the default daemon operation (with implicit auto-scan).
Worth noting that the ReportKernelEvent() method is only usable when
'--no-auto-scan' is explicitly used in the daemon. An error will be reported if
the method is tried while standard udev monitoring is enabled (implicit if
auto scan isn't explicitly disabled in the daemon).
If mmcli is going to be used only to report 'real time' events, an optional
'--initial-kernel-events=[PATH]' may be given in the ModemManager call to
automatically process a set of port kernel events one by one on boot. The file
may e.g. contain:
action=add,name=wwan0,subsystem=net
action=add,name=cdc-wdm0,subsystem=usbmisc
|
|
The default setup uses a refresh time of 30s, which means that even if the GPS
location updates are received at a higher frequency, the DBus interface will
still expose at most one update every 30s.
This patch includes a new "SetGpsRefreshTime()" method in the Location
interface, which takes a single 'u' parameter, specifying the refresh rate to
use, in seconds. This method also allows 0 being passed, which will make the
implementation to publish the GPS location updates are soon as ModemManager
detects them.
Along with the new method, a "GpsRefreshTime" read-only property is exposed
to specify the refresh time in effect.
The new method and property will only be applicable if the device has GPS
capabilities.
https://bugs.freedesktop.org/show_bug.cgi?id=89924
|
|
The MMBearer object is updated to provide getter methods to retrieve the new
MMBearerStats object.
|
|
The new MMBearerStats object provides a simple API to interact with the new
dictionary containing the bearer connection stats.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MMSmsProperties
|
|
Will be used in 3GPP2 SMS messages.
|
|
Will be used in 3GPP2 SMS messages.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
|
|
There is no implementation of the Contacts interface yet, just avoid exposing it
for now.
https://bugzilla.gnome.org/show_bug.cgi?id=701989
|
|
We won't allow changing modes or bands through Simple.Connect(). Applications
should instead look at the corresponding SupportedBands or SupportedModes, and
then use SetCurrentBands() or SetCurrentModes() explicitly.
|
|
For those modems which expose a valid 'SupportedCapabilities' property with more
than one item in the list, we'll allow switching between them.
|
|
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
|
|
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
|
|
Instead of just a mask of MMModemMode values, we now provide a list of the
allowed and preferred mode combinations supported by the modem. E.g.:
$> sudo mmcli -m 0
-------------------------
Modes | supported: 'allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 2g, 3g; preferred: none
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 3g; preferred: 3g
| allowed: 4g; preferred: none
| allowed: 2g, 3g, 4g; preferred: none'
|
|
... and 'SetBands()' to 'SetCurrentBands()'.
We'll keep the 'Current' keyword in those properties which also have
'Supported' values.
|
