aboutsummaryrefslogtreecommitdiff
path: root/cli
AgeCommit message (Collapse)Author
2020-11-20core: new 'rpmsg' subsystemAleksander Morgado
Most older Qualcomm SoCs (e.g. MSM8916, MSM8974, ...) communicate with the integrated modem via shared memory (SMD channels). This is similar to QRTR on newer SoCs, but without the "network" layer. In fact, the older SoCs also have QRTR, but the modem QMI services are not exposed there. The mainline Linux kernel exposes SMD channels via the "remote processor messaging bus" (rpmsg). Through special IOCTL calls it is possible to create a char device for a rpmsg/SMD channel. We can then use these to send QMI/AT messages to the modem, much like the ordinary serial char devices when using a Qualcomm modem through USB. This commit introduces support for the new 'rpmsg' subsystem, which allows exporting QMI-capable and AT-capable ports. By default NO rpmsg port is flagged as candidate, it is assumed that the plugin adding support for the rpmsg subsystem will add specific rules to do so (e.g. so that non-modem ports are explicitly not flagged as candidate). All rpmsg ports will be probed for AT or QMI capabilities, unless explicit port type hints (e.g. ID_MM_PORT_TYPE_QMI or ID_MM_PORT_TYPE_AT_PRIMARY) are set. These changes are highly based on the initial integration work done by Stephan Gerhold <stephan@gerhold.net> in postmarketOS, see: https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/merge_requests/363
2020-10-19libmm-glib,mmcli: add mm_sim_get_eid and add EID to mmcli outputEric Caruso
This exposes the new EID property of the SIM object on mmcli.
2020-08-28api,modem: new 'SetPrimarySimSlot' methodAleksander Morgado
This new method allows changing the SIM slot considered as primary, when the modem supports multiple SIM slots. The generic handling of this method will make sure that the modem object and all its SIM objects are re-probed from scratch as soon as a successful SIM slot switch happens. Implementations may report MM_CORE_ERROR_EXISTS when the switch doesn't need to happen (e.g. if the requested SIM slot is already the active one).
2020-08-28mmcli: also lookup SIM objects in the 'SimSlots' propertyAleksander Morgado
If the device supports multiple SIM slots, when the user provides a PATH or INDEX of a SIM card to use, don't look for the SIM object only in the 'Sim' property, also look for it in the 'SimSlots' property.
2020-08-28api,modem: new 'SimSlots' and 'PrimarySimSlot' propertiesAleksander Morgado
The 'SimSlots' property exposes an array of SIM object paths, with one array item for each available SIM slot in the system. If a valid SIM card is found in a given slot, the path of the SIM object will be exposed in the array item; if no valid SIM card is found, the empty object path ("/") will be exposed instead. The 'PrimarySimSlot' property exposes which of the SIM slots available in the system is the one configured as being primary. In a Multi-SIM Single-Standby setup, the primary slot will be the one corresponding to the single active SIM in the system. In a Multi-SIM Multi-Standby setup, the primary slot will be the one configured to act as primary (e.g. the one that will be used for the data connection) among all the active SIM cards found.
2020-08-28api,sim: new 'Active' propertyAleksander Morgado
In preparation for the multi-SIM setup, we need a way to tell whether a given SIM card is active or not in the system. On systems with one single SIM slot, the available SIM card will always be active. On Multi-SIM Single-Standby setups we may have multiple SIM slots with multiple SIM cards, but only one of them will be active at any given time. On Multi-SIM Multi-Standby setups we may have multiple SIM slots with multiple SIM cards that may be active at the same time. E.g. the QMI protocol allows up to 5 different active SIM cards (primary, secondary, tertiary...).
2020-08-01mmcli,output: use 'path' instead of 'dbus path' in field descriptionsAleksander Morgado
2020-07-04iface-modem-signal: added 5G signal informationWalter Hagstrom
Extended the ModemManager Signal interface to include 5G signal information for RSRP, RSRQ and SINR via libqmi. Also extended mmci to print 5G signal info.
2020-06-05cli: make control chars in strings are escaped correctly for json outputMaxim Anisimov
We need to change json output escaping according to this https://bugzilla.gnome.org/show_bug.cgi?id=730425 Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
2020-05-05cli: add allowed-auth bearer property in outputAleksander Morgado
Given as a list of items, because the bearer can be created with one or more allowed authentication protocols.
2020-04-10api,bearer: add 'total-rx-bytes', 'total-tx-bytes' and 'total-duration' statsAleksander Morgado
Compiling the amount of bytes transferred and received during all tracked connection attempts, as well as the total duration of all the connections.
2020-04-10api,bearer: add 'attempts' and 'failed-attempts' statisticsAleksander Morgado
When we're reusing over and over the same bearer object, we can provide statistical information about the number of connection attempts that have been done and how many of them failed.
2020-04-09api: deprecate MM_MODEM_CAPABILITY_LTE_ADVANCEDAleksander Morgado
It's not used anywhere.
2020-04-09cli: improve --help output for --modem and --sim optionsAleksander Morgado
Specify the full list of supported object lookup methods.
2020-04-09cli: allow looking up for first available modem or SIMAleksander Morgado
When a system only has one single modem, it's convenient to just look for the first available modem or SIM object, instead of needing to provide the full path or the exact index number. This improvement allows users to use the "any" keyword, or any of its substrings (e.g. "an" or even "a") to match the first available object of the requested type. E.g.: $ mmcli -m a -------------------------------- General | dbus path: /org/freedesktop/ModemManager1/Modem/0 | device id: 1a48f1180f1fb0166d91f7b139d027136b59ba63 -------------------------------- Hardware | manufacturer: Sierra Wireless Inc. | model: Sierra Wireless EM7345 4G LTE ... Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/196
2020-04-09cli: consolidate logic to process user provided object lookup infoAleksander Morgado
The user may specify DBus objects in several ways, e.g. with full object paths, just with the object numeric ids, or in some other cases with the full device UID. Setup one single method to process this info for all object types, so that it's also easier to add new lookup methods for all at the same time.
2020-03-21cli: remove empty whiteline in --versionAleksander Morgado
This also fixes the Copyright section in the troffit generated HTML output.
2020-03-21cli: context: add ':' to the section titlesAleksander Morgado
So that --help-all print all sections in the same way as the Help and Application option groups.
2020-01-31cli: fix warnings with -WshadowAleksander Morgado
mmcli-manager.c: In function ‘context_free’: mmcli-manager.c:167:24: error: declaration of ‘ctx’ shadows a global declaration [-Werror=shadow] 167 | context_free (Context *ctx) | ~~~~~~~~~^~~ mmcli-manager.c:51:17: note: shadowed declaration is here 51 | static Context *ctx; | ^~~ ...
2020-01-31cli: fix warnings with -Wswitch-defaultAleksander Morgado
mmcli-output.c: In function ‘output_item_free’: mmcli-output.c:321:5: error: switch missing default case [-Werror=switch-default] 321 | switch (item->type) { | ^~~~~~ mmcli-output.c: In function ‘mmcli_output_dump’: mmcli-output.c:1208:5: error: switch missing default case [-Werror=switch-default] 1208 | switch (selected_type) { | ^~~~~~ mmcli-output.c: In function ‘mmcli_output_list_dump’: mmcli-output.c:1231:5: error: switch missing default case [-Werror=switch-default] 1231 | switch (selected_type) { | ^~~~~~
2020-01-31cli: fix warnings with -Wswitch-enumAleksander Morgado
mmcli.c: In function ‘log_handler’: mmcli.c:118:5: error: enumeration value ‘G_LOG_FLAG_RECURSION’ not handled in switch [-Werror=switch-enum] 118 | switch (log_level) { | ^~~~~~ mmcli.c:118:5: error: enumeration value ‘G_LOG_LEVEL_MESSAGE’ not handled in switch [-Werror=switch-enum] mmcli.c:118:5: error: enumeration value ‘G_LOG_LEVEL_INFO’ not handled in switch [-Werror=switch-enum] mmcli.c:118:5: error: enumeration value ‘G_LOG_LEVEL_MASK’ not handled in switch [-Werror=switch-enum]
2020-01-30build: use AX_IS_RELEASE() and AX_COMPILER_FLAGS()Aleksander Morgado
The autoconf macros AX_COMPILER_FLAGS_{CFLAGS|GIR|LDFLAGS} test for compiler and linker support of various flags, and add the flags to the generated output. If the command-line option '--enable-compile-warnings' is specified to 'configure', a number of additional warning options is also added to the output. This is the default. This update requires the presence of the GNU autoconf-archive in the system.
2020-01-03build: bump copyright years to 2020Aleksander Morgado
2020-01-01cli,location: use new mm_location_gps_nmea_get_traces()Aleksander Morgado
2019-12-02mmcli,output: skip printing empty value listsAleksander Morgado
E.g. we shouldn't print emergency numbers field if there is none available: $ mmcli -i 0 ------------------------------- General | dbus path: /org/freedesktop/ModemManager1/SIM/0 ------------------------------- Properties | imsi: 901700000026890 | iccid: 8988211000000268907 | operator id: 90170 | operator name: 901 70 | emergency numbers:
2019-11-15cli,modem: avoid using deprecated mm_pco_list_free()Aleksander Morgado
2019-10-27cli,output: fix truncated array output when == 10 elementsAleksander Morgado
The extra character size was only being applied when > 10 elements, leaving the == 10 case out of it, so the output was being truncated. Fix it, by using a more generic way to computing how many extra characters we need in the size. Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/151
2019-10-17api,sim: new 'Emergency Numbers' propertyAleksander Morgado
2019-10-17voice,api: new 'EmergencyOnly' boolean flagAleksander Morgado
This new flag allows users of the API to know whether general purpose voice calls are allowed or otherwise only voice calls to the registered emergency numbers should be performed. ModemManager won't really do any distinction between emergency and non-emergency calls at this point, this flag is just an early indication for the user of the API that no normal voice call should be attempted.
2019-10-17iface-modem-voice: all methods available even if not enabledAleksander Morgado
2019-10-11mmcli,firmware: don't use tabs when printing human-friendly listAleksander Morgado
2019-09-25cli: fix typo when looking for a specific call failsAleksander Morgado
$ sudo mmcli --call 1 --hangup error: couldn't find sms at '/org/freedesktop/ModemManager1/Call/1': 'no modems found' (cherry picked from commit e71a4282db94f8f18b5884fe7966b95febc18a6d)
2019-09-23cli,messaging: trivial fix in commentAleksander Morgado
2019-09-17mmcli: fix value escaping in new JSON output supportMaxim Anisimov
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
2019-08-28mmcli: coding style fixes in the new JSON output supportAleksander Morgado
2019-08-28mmcli: add json output supportMaxim Anisimov
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
2019-07-19api,voice: new CallWaitingSetup() and CallWaitingQuery() methodsAleksander Morgado
These new methods allow querying and updating the status of the call waiting network service, as per 3GPP TS 22.083. The status of the service is not a property because we don't want to unconditionally load it on every boot, given that the process involves talking to the network (i.e. it is not a device setting).
2019-07-11api,call: new JoinMultiparty() and LeaveMultiparty() methodsAleksander Morgado
2019-07-11api,call: new Multiparty boolean propertyAleksander Morgado
It will be set to TRUE if this call is part of a multiparty call.
2019-07-11api,call: new Deflect() methodAleksander Morgado
This method allows deflecting an incoming or waiting call to a different number.
2019-07-11api,voice: new Transfer() methodAleksander Morgado
This method will join all active and held calls into a single multiparty call, and then request the network to terminate the call on the subscriber's end and transfer the control of the call to the parties that are still in the call.
2019-07-11api,voice: new HangupAll() methodAleksander Morgado
This method will terminate all ongoing calls.
2019-07-11api,voice: new HoldAndAccept() methodAleksander Morgado
This method will put the currently active call on hold, and right away accept the next available call. The user of the API does not need to specify explicitly which is the next call to accept, because that is decided automatically: * If there is any waiting call, it will accept it right away. * If there is no waiting call but there is a held call, it will make the held call active again.
2019-07-11api,voice: new HangupAndAccept() methodAleksander Morgado
This method will hangup the currently active call and right away accept the next available call. The user of the API does not need to specify explicitly which is the next call to accept, because that is decided automatically: * If there is any waiting call, it will accept it right away. * If there is no waiting call but there is a held call, it will make the held call active again.
2019-05-06mmcli: allow use of modem UID to specify SIM operationJohny Mattsson
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/107
2019-04-09location,agps: include support for MSB A-GPSAleksander Morgado
2019-04-09location,agps: explicitly specify that MSA A-GPS is implementedAleksander Morgado
The A-GPS based implementations we currently have assume MSA A-GPS, so rename the MMModemLocationSource enum value to reflect that.
2019-04-09cli,location: minor refactor to handle the location setup flagsAleksander Morgado
2019-04-02api,modem: new 'CarrierConfigurationRevision' propertyAleksander Morgado
Which reports the version of the currently active carrier configuration. We also update the firmware 'version' reported in the firmware settings so that carrier-specific upgrades can be performed (e.g. when the firmware stays the same but the MCFG is updated).
2019-04-02iface-modem: new carrier config supportAleksander Morgado
During initialization phase we will allow querying the modem for the details of which carrier-specific configuration is being used, and will expose a description string in the API. In addition to showing the current configuration, we will also allow automatically switching the configuration based on the SIM card detected in the device. In order to allow this, plugins/modems will need to provide the expected mapping between carrier config description and MCCMNC. This mapping cannot be generic, because different manufacturers may use different description strings.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-06-09 20:36:28 +0000