| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
Along with a new '--cdma-activate-manual-with-prl'.
These can be used to request CDMA Manual Activation, like:
$> sudo mmcli \
-m 0 \
--cdma-activate-manual="spc=123456,sid=ab,mdn=0123456789abcde,min=0123456789abcde"
Or:
$> sudo mmcli \
-m 0 \
--cdma-activate-manual="spc=123456,sid=ab,mdn=0123456789abcde,min=0123456789abcde" \
--cdma-activate-manual-with-prl=/path/to/my/prl.data
|
|
|
|
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
|
|
|
|
New command to allow changing modem capabilities, if supported. The modem will
power cycle automatically after having changed them.
|
|
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
|
|
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
|
|
Instead of just a mask of MMModemMode values, we now provide a list of the
allowed and preferred mode combinations supported by the modem. E.g.:
$> sudo mmcli -m 0
-------------------------
Modes | supported: 'allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 2g, 3g; preferred: none
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 3g; preferred: 3g
| allowed: 4g; preferred: none
| allowed: 2g, 3g, 4g; preferred: none'
|
|
... and 'SetBands()' to 'SetCurrentBands()'.
We'll keep the 'Current' keyword in those properties which also have
'Supported' values.
|
|
|
|
We want to expose in the Modem interface the list of supported IP families, and
the easiest way to do so is to have the IP family as flags, and provide in the
interface a single enum.
Also, a value of 0 for a MMBearerIpFamily specifies that no flags are set, so
just rename it to 'NONE'.
And add a new 'ANY' value which sets all flags to 1.
|
|
The last line in a multi-line string was getting lost if it wasn't '\n'
terminated.
|
|
We don't want to support only 'relative' validity, so don't assume that the
Validity property will always be a uint32 value.
Instead, we define the Validity propery as '(uv)' tuple, where the first value
(a MMSmsValidityType) specifies the type of validity, and the second value is
a variant formatted accordingly to what the validity type specifies (e.g. a
uint32 value if the type is MM_SMS_VALIDITY_TYPE_RELATIVE).
|
|
|
|
We currently implement 'SIM missing' and 'SIM error', which are probably the
most common ones.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We do need to specify which is the primary port being used for controlling the
modem. This allows us to match the device with an already existing bluetooth
device in NetworkManager.
|
|
|
|
|
|
|
|
|
|
Also, make only the 'unique-id' mandatory.
|
|
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
|
|
It's pointless to have libmm-common around, just merge it into libmm-glib and
make ModemManager depend on libmm-glib directly. At the end, the non-common
stuff in libmm-glib is really minimal.
|
|
|
|
|
|
This new action allows creating a new file with the binary data stored in the
SMS, if any.
E.g.:
$> sudo mmcli -s 7 \
--create-file-with-data=output.txt
This action can only be run on SMS object with binary data.
|
|
This switch can be run along with the `--messaging-create-sms' action, in order
to include in the SMS the data as given in the file specified by the new switch.
E.g.:
$> sudo mmcli -m 0 \
--messaging-create-sms="number='1234567890'" \
--messaging-create-sms-with-data=file.txt
In this case, the SMS properties string cannot contain a 'text' field.
|
|
|
|
|
|
$> sudo mmcli -m 1 --messaging-status
/org/freedesktop/ModemManager1/Modem/1
----------------------------
Messaging | supported storages: 'sm, mt, me, sr'
| default storage: 'me'
|
|
Just for consistency with other interfaces, which also provide interface
specific prefixes in their mmcli actions.
|
|
Currently shows the list of supported SMS storages.
|
|
Expects the storage as the enum nickname string, e.g:
"me" for MM_SMS_STORAGE_ME
or
"sm" for MM_SMS_STORAGE_SM
|
|
... or MM_SMS_STORAGE_UNKNOWN to store it in the default storage.
|
|
|
|
Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
|
|
|
|
Instead of using a predefined set of string values for 'ip-type' in
Modem.CreateBearer() and Simple.Connect(), we'll use an enumeration. The
implementation will then need to convert the requested IP family type to e.g.
the correct PDP type in 3GPP modems.
This change also consolidates the use of enums in dictionary properties when
possible to do so, as with the Rm Protocol.
|
|
peek() doesn't increase the reference count of the proxy object, while get()
does it.
|
|
This patch fixes mmcli to set the default timeout on the manager proxy
interface (MmGdbusOrgFreedesktopModemManager1) instead of MMManager
itself. The later is not a GDBusProxy object.
|
