| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
We don't have a clear way to report "unknown" signal quality, so for
now just skip printing it altogether in the mmcli human output if the
modem is not yet enabled.
|
|
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/559
|
|
|
|
|
|
In order to show the properties of the profile management interface, e.g.:
$ sudo mmcli -m a --3gpp-profile-manager-status
-----------------------------------
3GPP profile manager | index field: apn-type
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These values show the rates that have been negotiated with the network
during the PS domain attach.
These are not the current ongoing data rates associated to the network
usage at some given moment.
Includes updates by Aleksander Morgado to fix coding style issues and
add missing documentation items.
|
|
This property allows the user to know whether the device is attached
or detached from the packet domain service.
|
|
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
Includes updates by Aleksander Morgado to fix coding style issues.
|
|
It stores the epoch timestamp of the current bearer session start.
If there is no connected bearer, it is set to 0 and not displayed
in mmcli output.
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
Includes updates by Aleksander Morgado to fix coding style issues.
|
|
Includes updates by Aleksander Morgado to fix mostly coding style issues.
|
|
Includes updates by Aleksander Morgado to fix mostly coding style issues.
|
|
QMI modems also report a profile name, and that value can be used to
select and update a specific profile.
|
|
|
|
Multi-sentence NMEA messages were printed as is, that is with
linebreaks, which made mmcli --location-get output look broken.
Split NMEA sentences with linebreaks to separate output list items, so
that they line up correctly.
|
|
This new property will provide detailed information about the failed
connection attempt, or about the network initiated disconnection. The
property will be cleared only if a new connection attempt is
triggered, and so it can be used to investigate why a given attempt
failed without needing to be the one who triggered the attempt (e.g.
so that failures in NetworkManager-triggered connection attempts can
be investigated looking at the DBus API).
The property is built as a (ss) tuple, but the libmm-glib interface
provides methods to read this property as a GError.
|
|
To report which is the currently active profile with this bearer, if
known. If the modem doesn't support profiles, or if the bearer is
disconnected, -1 (MM_3GPP_PROFILE_ID_UNKNOWN) will be reported.
It is guaranteed that no two connected bearers will have the same
ProfileId property value.
|
|
This new interface allows modems to expose the list of available
connection profiles stored in the device and edit or delete them; as
long as the underlying device/protocol allows it.
|
|
We define a new 'profile-id' setting in the bearer properties that
users will use to specify which connection profile of the ones
available in the device should be connected.
When the 'profile-id' is given, the associated bearer object will be
bound to the 'profile-id', and the user is able to provide additional
settings to apply on top (e.g. if the profile storage doesn't allow
some of the settings we support, like 'apn-type', or if the setting is
completely unrelated to profiles, like 'multiplex').
After introducing the 'profile-id' as a valid setting in the bearer
properties, we also reimplement the properties object internals to
make use a 3GPP profile for the subset of common settings between both
objects.
|
|
This new setting allows the user setting up the connection to specify
the purpose of the connection being brought up.
Until now, we would always assume that connections are exclusively
brought up for connecting to the Internet, also limited by the
inability to connect to multiple different APNs at the same time.
But that may really not be true as there may be additional services
that may be accessed through other APNs, like MMS services or even
private networks for companies that have their own APNs on a given
operator (e.g. not that uncommon with banks and connected cars).
The new APN type setting will not change the way the bearer is
connected, but will allow the connection manager to decide what kind
of networking setup the specific connection needs.
This new setting can be provided by the user itself, or implicitly
read from the device if the device stores this information.
|
|
This property will be TRUE if the bearer has the data session
connected through a multiplexed interface.
If the bearer is disconnected, or connected without multiplexing, the
property will report FALSE.
|
|
|
|
This exposes the new EID property of the SIM object on mmcli.
|
|
The 'SimSlots' property exposes an array of SIM object paths, with one
array item for each available SIM slot in the system. If a valid SIM
card is found in a given slot, the path of the SIM object will be
exposed in the array item; if no valid SIM card is found, the empty
object path ("/") will be exposed instead.
The 'PrimarySimSlot' property exposes which of the SIM slots available
in the system is the one configured as being primary. In a Multi-SIM
Single-Standby setup, the primary slot will be the one corresponding
to the single active SIM in the system. In a Multi-SIM Multi-Standby
setup, the primary slot will be the one configured to act as primary
(e.g. the one that will be used for the data connection) among all the
active SIM cards found.
|
|
In preparation for the multi-SIM setup, we need a way to tell whether
a given SIM card is active or not in the system.
On systems with one single SIM slot, the available SIM card will
always be active.
On Multi-SIM Single-Standby setups we may have multiple SIM slots with
multiple SIM cards, but only one of them will be active at any given
time.
On Multi-SIM Multi-Standby setups we may have multiple SIM slots with
multiple SIM cards that may be active at the same time. E.g. the QMI
protocol allows up to 5 different active SIM cards (primary,
secondary, tertiary...).
|
|
|
|
Extended the ModemManager Signal interface to include 5G signal
information for RSRP, RSRQ and SINR via libqmi. Also extended mmci
to print 5G signal info.
|
|
We need to change json output escaping according to this
https://bugzilla.gnome.org/show_bug.cgi?id=730425
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
|
|
Given as a list of items, because the bearer can be created with one
or more allowed authentication protocols.
|
|
Compiling the amount of bytes transferred and received during all
tracked connection attempts, as well as the total duration of all the
connections.
|
|
When we're reusing over and over the same bearer object, we can
provide statistical information about the number of connection
attempts that have been done and how many of them failed.
|
|
mmcli-output.c: In function ‘output_item_free’:
mmcli-output.c:321:5: error: switch missing default case [-Werror=switch-default]
321 | switch (item->type) {
| ^~~~~~
mmcli-output.c: In function ‘mmcli_output_dump’:
mmcli-output.c:1208:5: error: switch missing default case [-Werror=switch-default]
1208 | switch (selected_type) {
| ^~~~~~
mmcli-output.c: In function ‘mmcli_output_list_dump’:
mmcli-output.c:1231:5: error: switch missing default case [-Werror=switch-default]
1231 | switch (selected_type) {
| ^~~~~~
|
|
E.g. we shouldn't print emergency numbers field if there is none available:
$ mmcli -i 0
-------------------------------
General | dbus path: /org/freedesktop/ModemManager1/SIM/0
-------------------------------
Properties | imsi: 901700000026890
| iccid: 8988211000000268907
| operator id: 90170
| operator name: 901 70
| emergency numbers:
|
|
The extra character size was only being applied when > 10 elements,
leaving the == 10 case out of it, so the output was being truncated.
Fix it, by using a more generic way to computing how many extra
characters we need in the size.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/151
|
|
|
|
This new flag allows users of the API to know whether general purpose
voice calls are allowed or otherwise only voice calls to the
registered emergency numbers should be performed.
ModemManager won't really do any distinction between emergency and
non-emergency calls at this point, this flag is just an early
indication for the user of the API that no normal voice call should be
attempted.
|
|
|
|
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
|
|
|
|
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
|
|
It will be set to TRUE if this call is part of a multiparty call.
|
