| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Lukas Voegl <lvoegl@tdt.de>
|
|
We don't have a clear way to report "unknown" signal quality, so for
now just skip printing it altogether in the mmcli human output if the
modem is not yet enabled.
|
|
|
|
|
|
This property allows the user to know whether the device is attached
or detached from the packet domain service.
|
|
This new method allows changing the SIM slot considered as primary,
when the modem supports multiple SIM slots.
The generic handling of this method will make sure that the modem
object and all its SIM objects are re-probed from scratch as soon as a
successful SIM slot switch happens.
Implementations may report MM_CORE_ERROR_EXISTS when the switch
doesn't need to happen (e.g. if the requested SIM slot is already the
active one).
|
|
The 'SimSlots' property exposes an array of SIM object paths, with one
array item for each available SIM slot in the system. If a valid SIM
card is found in a given slot, the path of the SIM object will be
exposed in the array item; if no valid SIM card is found, the empty
object path ("/") will be exposed instead.
The 'PrimarySimSlot' property exposes which of the SIM slots available
in the system is the one configured as being primary. In a Multi-SIM
Single-Standby setup, the primary slot will be the one corresponding
to the single active SIM in the system. In a Multi-SIM Multi-Standby
setup, the primary slot will be the one configured to act as primary
(e.g. the one that will be used for the data connection) among all the
active SIM cards found.
|
|
It's not used anywhere.
|
|
So that --help-all print all sections in the same way as the Help and
Application option groups.
|
|
mmcli-manager.c: In function ‘context_free’:
mmcli-manager.c:167:24: error: declaration of ‘ctx’ shadows a global declaration [-Werror=shadow]
167 | context_free (Context *ctx)
| ~~~~~~~~~^~~
mmcli-manager.c:51:17: note: shadowed declaration is here
51 | static Context *ctx;
| ^~~
...
|
|
|
|
Which reports the version of the currently active carrier
configuration.
We also update the firmware 'version' reported in the firmware
settings so that carrier-specific upgrades can be performed (e.g. when
the firmware stays the same but the MCFG is updated).
|
|
During initialization phase we will allow querying the modem for the
details of which carrier-specific configuration is being used, and
will expose a description string in the API.
In addition to showing the current configuration, we will also allow
automatically switching the configuration based on the SIM card
detected in the device. In order to allow this, plugins/modems will
need to provide the expected mapping between carrier config
description and MCCMNC. This mapping cannot be generic, because
different manufacturers may use different description strings.
|
|
If the modem ends up not being managed by ModemManager, detect it
during the '--monitor-state' mmcli operation and report it.
https://gitlab.freedesktop.org/mobile-broadband/ModemManager/issues/106
|
|
Modem device inhibition is really a manager action for which we
provide the full modem device 'uid'.
This new operation allows to perform device inhibition using the modem
object as reference, which is more handy than first looking at the
device 'uid' and then running the manager action.
$ sudo mmcli -m 0 --inhibit
successfully inhibited device with uid '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.2'
type Ctrl+C to abort this program and remove the inhibition
^C cancelling the operation...
successfully uninhibited device with uid '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.2'
|
|
Even if some fields wouldn't apply to some modem, we're always
including all in the output so that clients can assume the fields are
always given.
Fix adding the 3GPP EPS related fields unconditionally.
|
|
This property shows the settings stored in the device to be used
during the initial LTE attach procedure.
|
|
This property contains the DBus path of a Bearer object of type
MM_BEARER_TYPE_DEFAULT_ATTACH, which is automatically exposed by the
modem when registered in the LTE network.
Unlike standard bearer objects created by the user, this bearer won't
allow any connection/disconnection request, as its status is bound to
the LTE registration exclusively.
The bearer settings exposed by the object include the APN details that
have been used during the initial packet network attach, which may be
defined by modem settings (e.g. if previously configured in the
firmware which APN to use for the given SIM card operator) or by the
network itself (e.g. if none configured, or if a network override is
required as when roaming).
The bearer object will be created as soon as the LTE attach status
details are known, and only while the modem is enabled. The
implementation allows modems to update the LTE attach status details
during runtime, so the bearer object with the settings may be
recreated during runtime as well.
|
|
In addition to the standard human-friendly output, we now allow a
machine-friendly key-value pair output, much easier to parse and use
by programs that look at the mmcli output.
This new key-value pair output should be treated as API from now on, so
third-party programs can assume the output is compatible from one
release to another.
|
|
This method is completely unnecessary as we have the readable Bearers
property already in place, so let's deprecate it.
Worth noting that the mm_modem_list_bearers() async/sync methods in
libmm-glib were not really using the ListBearers() method anyway, they
are using the property directly. These methods are NOT deprecated,
because they allow us to get a list of MMBearer objects, instead of
just the list of DBus paths that we get when reading the Bearers
property directly.
We also remove --list-bearers from the mmcli operation list as we have
already the same information in the standard modem output.
|
|
|
|
|
|
The UE modes of operation for LTE are defined in 3GPP TS 24.301 (e.g.
section 4.3 in v10.3.0):
* PS mode 1: EPS only, 'voice centric'
* PS mode 2: EPS only, 'data centric'
* CS/PS mode 1: EPS and non-EPS, 'voice centric'
* CS/PS mode 2: EPS and non-EPS, 'data centric'
The mode specifies, among other things, how the UE should behave w.r.t
CS fallback depending on the capabilities reported by the network.
|
|
|
|
mmcli is GPLv2+; that's what --version has always said and that's what the
README in ModemManager sources specifies:
License.
The ModemManager and mmcli binaries are both GPLv2+.
The libmm-glib library is LGPLv2+.
|
|
|
|
|
|
|
|
|
|
|
|
We will expose a new 'Ports' property listing all ports currently known by a
given modem. Ports which are not used but are detected as being part of the
modem will be listed with an 'unknown' port type.
This change uses the new 'MMModemPortType' enum and the new 'MMModemPortInfo'
helper struct to handle these values in libmm-glib. The already available
'MMPortType' enum hasn't been re-used for the interface because it contains
values that we don't need (e.g. IGNORED).
The port list is now also included in the modem information command of mmcli:
$ sudo mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '97b7b99e3e2bea103880545b619fb05a3cc81b26')
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'cdc-wdm0'
| ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), cdc-wdm0 (qmi), wwp0s29u1u4 (net)'
https://bugzilla.gnome.org/show_bug.cgi?id=702678
|
|
New command to allow changing modem capabilities, if supported. The modem will
power cycle automatically after having changed them.
|
|
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
|
|
We now have a single 'CurrentModes' property which contains both values in a
tuple with signature "(uu)".
Also, rename 'SetAllowedModes()' to 'SetCurrentModes()', and update the list of
arguments expected to have a single "(uu)" tuple.
|
|
Instead of just a mask of MMModemMode values, we now provide a list of the
allowed and preferred mode combinations supported by the modem. E.g.:
$> sudo mmcli -m 0
-------------------------
Modes | supported: 'allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 2g, 3g; preferred: none
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 3g; preferred: 3g
| allowed: 4g; preferred: none
| allowed: 2g, 3g, 4g; preferred: none'
|
|
... and 'SetBands()' to 'SetCurrentBands()'.
We'll keep the 'Current' keyword in those properties which also have
'Supported' values.
|
|
|
|
|
|
We currently implement 'SIM missing' and 'SIM error', which are probably the
most common ones.
|
|
|
|
|
|
We do need to specify which is the primary port being used for controlling the
modem. This allows us to match the device with an already existing bluetooth
device in NetworkManager.
|
|
|
|
|
|
Both the ModemManager daemon and the mmcli will now include `libmm-glib.h' only.
We also handle two new special `_LIBMM_INSIDE_MM' and `LIBMM_INSIDE_MMCLI'
symbols, which if included before the `libmm-glib.h' library allow us to:
* Don't include the libmm-glib high level API in the ModemManager daemon, as
the object names would clash with those in the core.
* Define some of the methods of helper objects to be included only if compiling
ModemManager daemon or the mmcli.
|
|
|
|
Different ports of the same modem may get handled by different drivers. We
therefore need to provide a list of drivers (new `Modem.Drivers' property with
signature 'as') instead of just one (removed `Modem.Driver' property with
signature 's').
$ sudo mmcli -m 0 | grep drivers
| drivers: 'qcserial, qmi_wwan'
|
|
We remove the `--command-timeout' option, as the AT command timeout is now
directly computed from our default DBus timeout (modifiable with `--timeout').
|
|
By default 30s will be used for every operation.
|
|
|
