| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This facility cannot be retrieved via 'DMS UIM Get CK Status' and seems
currently unimplemented for mm-broadband-modem-qmi. The SIM enabled
status is however available via 'DMS UIM Get PIN Status'.
Using this message to add the retrieval of PIN status just after the
other facilities were queried.
Succesfully tested with Gobi2000 (05c6:9205), both retrieval of 3gpp
SIM lock status and enabling/disabling the PIN.
|
|
Bluetooth serial devices are weird. They begin life being bound with
RFCOMMCREATEDEV ioctl() and then move around the sysfs tree when they are
connected and disconnected. The connection is estabilished upon the first
open() and torn down upon last close(), their first user virtually being
"owner" of the connection. We don't want to be that process, we're only
interested in actually connected modems. However, currently we have no
knowledge of that and therefore we connect and disconnect multiple times while
probing.
This patch marks unconnected RFCOMM devices as uninteresting to us.
The actual connection and disconnection will be handled by NetworkManager.
|
|
device_added() might be called in response to a "change" or "move" attempt that
might have changed a candidate device to a non-candidate one.
|
|
For certain devices the name changes with their status. Notably, RFCOMM
devices move from /devices/virtual/ to underneath the HCI that is used
for the connection as the session is estabilished, and return back when
it's torn down.
|
|
Stupid me, introduced a bug when manually writing the previous patch.
:/
|
|
My modem (Samsung GI B3740) responded "IPV4" to "CGDCONT=?". This was
not handled in mm-modem-helpers.c. The obvious fix was to return
MM_BEARER_IP_FAMILY_IPV4.
|
|
|
|
disconnected
When the MBIM modem unexpectedly loses connection the port state never
gets set as disconnected thus when trying to reestablish a new
connection the bearer cannot find a port in the disconnected state.
Signed-off-by: Greg Suarez <gpsuarez2512@gmail.com>
|
|
|
|
|
|
But keep the retries when the frame marker isn't found.
https://bugzilla.gnome.org/show_bug.cgi?id=708861
|
|
b28230411 moved up the self->priv->forced_close = TRUE, which
caused mm_port_serial_close() to just return without actually
closing the port and cleaning up.
Also, cancel the reopen separately from closing the port since
the two operations are actually independent of each other.
|
|
The timeout for starting ModemManager on the test bus was 3s, which is
sufficient under normal conditions. However, when running ModemManager
tests on a build infrastructure under a heavy load, we've observed that
the timeout isn't always sufficient and that becomes the source of false
test failures. This patch increases the timeout to 30s, which shouldn't
introduce any unexpected behavior under normnal conditions while
addressing the timeout issue on heavily loaded systems.
|
|
We don't want people to use the logic enabled by this switch, so remove it from
configure to avoid confusions. Developers can still enable the related code by
defining WITH_NEWEST_QMI_COMMANDS via CFLAGS; e.g.:
$ NOCONFIGURE=1 ./autogen.sh
$ ./configure CFLAGS="-DWITH_NEWEST_QMI_COMMANDS"
|
|
--with-newest-qmi-commands
This patch fixes the registration reporting/checking when ModemManager is
built with --with-newest-qmi-commands. apply_cs and apply_ps were not
properly initialised and may never be true. Also fixes a CnP error for
mm_ps_registration_state.
Signed-off-by: David McCullough <david.mccullough@accelecon.com>
|
|
--with-newest-qmi-commands
This patch fixes the signal strength values when using ModemManager built
with --with-newest-qmi-commands.
It was never getting a valid signal strength because the default (0) is
always greater than a valid signal strength, and the rssi_max handling
was completely wrong.
Signed-off-by: David McCullough <david.mccullough@accelecon.com>
|
|
|
|
|
|
|
|
Also bump libqmi requirement to 1.11.1, which is the one exposing the new A-GPS
related commands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It was actually included in the man page of the daemon, but we didn't have it.
|
|
The MF60 exposes a QMI+net pair, but they are unusable as the WDS service
returns error when e.g. launching a connection.
So, fallback to AT+PPP in this device.
|
|
The new 'ID_MM_PORT_IGNORE' tag will tell ModemManager to fully avoid using a
given port.
Note that it is key to not only flag the port probe as ignored, but also to
fully ignore the ports in e.g. mm_port_probe_list_has_qmi_port() as those
methods will be used to decide which kind of modem object to create. We don't
want to create a QMI-based modem which may have all QMI ports blacklisted.
|
|
E.g. this would be the result when having ModemManager compiled without QMI
support, and a modem with 2 QMI/WWAN pairs:
$ mmcli -m 2
/org/freedesktop/ModemManager1/Modem/2 (device id '417e4dcff7f232b62cfe6c972e2099701848fd7f')
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7304'
| revision: 'SWI9X15C_05.05.02.00 r19147 carmd-fwbuild1 2013/11/15 13:54:28'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: 'unknown'
-------------------------
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7'
| drivers: 'qcserial, qmi_wwan'
| plugin: 'Gobi'
| primary port: 'ttyUSB8'
| ports: 'ttyUSB8 (at), wwp0s29u1u7i8 (unknown), ttyUSB6 (qcdm), wwp0s29u1u7i10 (unknown)'
The /dev/cdc-wdm ports don't even appear (as they were not even probed), but the
newly ignored WWAN ports do appear in the list, but flagged as UNKNOWN type
(instead of NET).
|
|
Modems may expose ports that are either just not used (e.g. modems exposing more
than 2 functional AT ports) or explicitly avoided (e.g. WWAN ports when we don't
know how to use them).
Those kind of ports are part of the modem, but not used by ModemManager. Still,
ModemManager should list them in the list of ports available for the modem, with
IGNORED type.
|
|
|
|
|
|
|
|
$ git shortlog -s -n
|
|
Some newer modems (Huawei E1750, Sierra 73xx) provide what looks like
legitimate static IPv4 configuration through the WDSGetCurrentSettings
call, but when configured the interface does not pass traffic. Running
DHCP on the same interface provides a slightly different IPv4
configuration but does allow traffic to pass.
Since QMI was switched to static originally for consistency with IPv6
and for speed of IP configuration (since DHCP takes a bit of time), but
not for any known problems with modems, let's switch back to DHCP until
we have time to figure out what's actually going on.
|
|
|
|
|
|
|
|
Third revision of Huawei nwtime support. Takes on feedback from the
mailing list including helpers, some basic tests and use of the ^NTCT
command to determine network time support (^NWTIME). Expanded test cases,
more use of g_assert and more logical helper return values/errors.
Signed-off-by: David McCullough <david.mccullough@accelecon.com>
|
|
We have a report of a modem that switches access technologies frequently,
in this case almost every 10 seconds. While that's unusual, it's not
unexpected depending on the RF environment. We shouldn't spam syslog
with that info; if we need it we can get it with mmcli.
|
|
|
|
We were depending on some new MbimNwError values defined at some point in the
1.9 development series. Depend on the new stable 1.10 version now that it's been
released.
|
|
|
|
So, we may have modems with multiple /dev/cdc-wdm ports, like Ericsson modems,
where only 1 of them is MBIM. With the previous logic, we would probe all
/dev/cdc-wdm ports for MBIM as soon as one of the ports was handled by the
cdc_mbim driver. That is totally not optimal, as we are already know that they
are not MBIM (not handled by cdc_mbim).
Instead, fix the logic to just probe for MBIM or QMI if the actual driver
managing the port is MBIM or QMI.
|
|
It's been observed that some modems occasionally take a long time to
power down (which may be due to some shutdown sequence that involves
communicating with network). This patch increases the timeout for
powering modem up and down from 10s to 20s.
|
|
It's been observed that modems may take a long time to disconnect from
the network under certain network conditions. This patch increases the
timeout for the MBIM_CID_CONNECT set command in the disconnect sequence
from 10s to 30s.
|
