diff options
| author | Stephan Gerhold <stephan@gerhold.net> | 2022-03-23 17:54:08 +0100 |
|---|---|---|
| committer | Stephan Gerhold <stephan@gerhold.net> | 2022-03-23 20:39:14 +0100 |
| commit | 8d95c82f9c2d558148aec74cfcaf17e3941d806c (patch) | |
| tree | 4b0ed347139e8e34b3da876600ed0d6a09760898 /src/mm-shared-qmi.c | |
| parent | 8ab31cf0e60b7fef7acc8790c034687b4c229459 (diff) | |
shared-qmi: ignore slot status indications until initial status is known
Recent ModemManager versions no longer work on the Samsung A5 (Qualcomm
MSM8916) smartphone: MM ends up in an infinite loop trying to probe the
modem over and over again.
Looking at the debug log it seems to be related to a "Slot Status"
indication that comes in during probe time and causes MM to restart
the probing process:
[/dev/wwan0qmi0] Sent generic request (translated)...
<< QMUX: service = "uim"
<< QMI: message = "Register Events" (0x002E)
<< TLV: translated = physical-slot-status
[/dev/wwan0qmi0] Received generic indication (translated)...
<< QMUX: service = "uim"
<< QMI: message = "Slot Status" (0x0048)
<< TLV: translated = { [0] = '[ physical_card_status = 'present', ...
[/dev/wwan0qmi0] Received generic response (translated)...
<< QMUX: service = "uim"
<< QMI: message = "Register Events" (0x002E)
<< TLV: translated = SUCCESS
[modem42] registered for slot status indications
[/dev/wwan0qmi0] Sent generic request (translated)...
<< QMUX: service = "uim"
<< QMI: message = "Get Slot Status" (0x0047)
[modem42] received slot status indication
[modem42] An active slot had a status change, will reprobe the modem
<infinite loop>
The "Slot Status" indication (uim_slot_status_indication_cb) arrives
immediately after starting to listen for the event, which is before
ModemManager has actually loaded the initial slot status in
uim_get_slot_status_ready. In this situation !slot_array_status_equal()
will always cause the modem to reprobe, even though it is not necessary
during the probe phase.
To fix this add a simple check to uim_slot_status_indication_cb() that
ignores the indication if the initial slot status was not loaded yet.
Diffstat (limited to 'src/mm-shared-qmi.c')
| -rw-r--r-- | src/mm-shared-qmi.c | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/src/mm-shared-qmi.c b/src/mm-shared-qmi.c index 0326735b..83ebcc6c 100644 --- a/src/mm-shared-qmi.c +++ b/src/mm-shared-qmi.c @@ -3795,6 +3795,11 @@ uim_slot_status_indication_cb (QmiClientUim *client, priv = get_private (self); mm_obj_dbg (self, "received slot status indication"); + if (!priv->slots_status) { + mm_obj_dbg (self, "initial slot status is not loaded yet"); + return; + } + if (!qmi_indication_uim_slot_status_output_get_physical_slot_status (output, &new_slots_status, &error)) { |