api: remove Modem.Sar interface

There is no real implementation for it yet, so let's recover these
changes once 1.18 has been released.

3 files changed, 0 insertions, 104 deletions

diff --git a/introspection/Makefile.am b/introspection/Makefile.am
index c7515773..fccf3b8f 100644
--- a/introspection/Makefile.am
+++ b/introspection/Makefile.am
@@ -21,7 +21,6 @@ xml_DATA = \
 	org.freedesktop.ModemManager1.Modem.Time.xml \
 	org.freedesktop.ModemManager1.Modem.Voice.xml \
 	org.freedesktop.ModemManager1.Call.xml \
-	org.freedesktop.ModemManager1.Modem.Sar.xml \
 	org.freedesktop.ModemManager1.Modem.Modem3gpp.ProfileManager.xml \
 	$(NULL)
 
diff --git a/introspection/all.xml b/introspection/all.xml
index dda64dd5..fabf2dd9 100644
--- a/introspection/all.xml
+++ b/introspection/all.xml
@@ -17,7 +17,6 @@
   <xi:include href="org.freedesktop.ModemManager1.Modem.Location.xml"/>
   <xi:include href="org.freedesktop.ModemManager1.Modem.Time.xml"/>
   <xi:include href="org.freedesktop.ModemManager1.Modem.Firmware.xml"/>
-  <xi:include href="org.freedesktop.ModemManager1.Modem.Sar.xml"/>
   <xi:include href="org.freedesktop.ModemManager1.Modem.Signal.xml"/>
   <xi:include href="org.freedesktop.ModemManager1.Modem.Oma.xml"/>
 
diff --git a/introspection/org.freedesktop.ModemManager1.Modem.Sar.xml b/introspection/org.freedesktop.ModemManager1.Modem.Sar.xml
deleted file mode 100644
index 773cd571..00000000
--- a/introspection/org.freedesktop.ModemManager1.Modem.Sar.xml
+++ /dev/null
@@ -1,102 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-
-<!--
- ModemManager 1.0 Interface Specification
-
-   Copyright (C) 2020 Google, Inc.
--->
-
-<node name="/" xmlns:doc="http://www.freedesktop.org/dbus/1.0/doc.dtd">
-
-  <!--
-      org.freedesktop.ModemManager1.Modem.Sar:
-      @short_description: The ModemManager dynamic SAR interface.
-
-      The SAR interface defines operations and properties for dynamic SAR, so
-      that user applications can control the output power level dynamically.
-
-      Using the SAR interface is not trivial, and it requires prior knowledge of
-      the internal SAR mapping table configured in each device.
-
-      The SAR mapping table is defined by the manufacturer of the device, and is
-      usually setup to match a specific hardware setup (e.g. a specific laptop or
-      hardware configuration). This table may provide different power levels for
-      different frequency bands and/or antennas.
-
-      An example SAR mapping table, where all bands and antennas share the same
-      level, could look like this:
-      <table>
-        <tr><td>Power Level</td><td>LTE B3</td>   <td>LTE B7</td>   <td>LTE B20</td></tr>
-        <tr><td>0</td>          <td>26.0 dBm</td> <td>26.5 dBm</td> <td>27.0 dBm</td></tr>
-        <tr><td>1</td>          <td>26.5 dBm</td> <td>27.0 dBm</td> <td>27.5 dBm</td></tr>
-        <tr><td>2</td>          <td>27.0 dBm</td> <td>27.5 dBm</td> <td>28.0 dBm</td></tr>
-        <tr><td>3</td>          <td>27.5 dBm</td> <td>28.0 dBm</td> <td>28.5 dBm</td></tr>
-        <tr><td>4</td>          <td>28.0 dBm</td> <td>28.5 dBm</td> <td>28.5 dBm</td></tr>
-        <tr><td>5</td>          <td>28.5 dBm</td> <td>28.5 dBm</td> <td>28.5 dBm</td></tr>
-      </table>
-
-      In this example, the SAR mapping table has 6 different levels (0 to 5),
-      and it's applied exclusively for LTE bands B3, B7 and B20 in all available
-      antennas. None of this information is exposed to the user in the SAR
-      interface, not even the amount of levels available.
-  -->
-  <interface name="org.freedesktop.ModemManager1.Modem.Sar">
-
-    <!--
-        Enable:
-        @enable: %TRUE to enable dynamic SAR and %FALSE to disable it.
-
-        Enable or disable dynamic SAR.
-
-        When enabled, the modem's output power level can be dynamically updated
-        by the host.
-
-        When disabled, the modem's output power level is dynamically updated
-        exclusively by the device.
-
-        Since: 1.18
-    -->
-    <method name="Enable">
-      <arg name="enable" type="b" direction="in" />
-    </method>
-
-    <!--
-        SetPowerLevel:
-        @level: Index of the SAR power level mapping table.
-
-        Set current dynamic SAR power level for all antennas on the device.
-
-        Please check with your modem vendor for detailed description on the
-        number of levels and corresponding power output for each level.
-
-        The index set here will apply to all antennas on the system.
-
-        Since: 1.18
-    -->
-    <method name="SetPowerLevel">
-      <arg name="level" type="u" direction="in" />
-    </method>
-
-    <!--
-        State:
-
-        Boolean indicating whether dynamic SAR is currently enabled.
-
-        Since: 1.18
-    -->
-    <property name="State" type="b" access="read" />
-
-    <!--
-        PowerLevel:
-
-        Current index of the SAR power level mapping table that is being used
-        for setting the output power of all antennas on the system.
-
-        This value is only applicable when dynamic SAR is enabled.
-
-        Since: 1.18
-    -->
-    <property name="PowerLevel" type="u" access="read" />
-
-  </interface>
-</node>